초록
밀가루에의 전지대두분 첨가가 반죽과 국수의 특성에 미치는 영향을 조사하였다. 밀가루는 국수제조용 박력분을 사용하였고 전지대두분은 350 mesh의 미세분말을 사용하였다. 밀가루에의 전지대두분 첨가는 20.0%까지 하였다. 반죽의 특성은 파리노그라프와 아밀로그라프로 측정하였고 생면과 조리면의 텍스쳐 측정은 레오메타로 측정하였다. 파리노그라프의 결과에서 밀가루에 대두분말 6.0% 첨가하였을 때 최소의 반죽형성시간과 안정도를 나타내었고 저항도에서는 대두분의 첨가량이 많아질수록 현저히 증가하였다. 아밀로그라프에서의 호화개시온도는 밀가루에 전지대두분을 첨가할수록 증가하였고 최고점도, 최종점도와 setback은 감소하였다. 수분흡수력은 밀가루의 81.6부터 대두분 8.0% 첨가때 94.0까지 증가하였지만 그 이상 대두분 첨가율이 증가할수록 감소하였다. 반죽의 신장도는 대두분 8.0% 첨가시 최고점에 도달한 후 감소하였다. 생면과 조리면의 견고성과 단단함은 대두분 6.0%에서 최대값을 보였다가 그 이상 첨가에서는 지속적으로 감소하였다. 또한, 전지대두분 첨가로 생면의 점착성이 높아졌고 조리면의 단단함과 견고성은 감소하였다. 전지대두분을 6.0% 첨가한 복합분을 이용하여 견고성과 점착성이 향상된 조리면 제조가 가능함을 알 수 있었다.
Addition of whole soy flour(WSF) to wheat flour(WF) was studies for its effects on dough and noodle characteristics. The WF used was medium grade of strength and WSF was a fine flour of 350 mesh. The addition ratio of WSF to. n was up to 20%. The dough properties and textural properties of wet and cooked noodles were measured with using Farinograph, Amylograph and Rheometer. Farinogram data showed the minimum dough development time and stability at 6% addition of WSF. Amylograph data of initial pasting temperature and time were increased while the maximum and final viscosity and setback were decreased as the WSF added more to W The initial pasting temperature of 2.0∼6.0% WSF added flour were comparable to 100% WF eventhough viscosity was almost half of WF. The water absorption capacity was increased from 81.6% to 92.3% at 6.0% WSF and then decreased as the addition ratio of WSF increased. The extensibility of dough showed a maximal value at 8.0% WSF addition. Strengthness and hardness of wet and cooked noodle were increased to the heighest measurement as the WSF added up to 6.0% followed by a steady decrease thereafter. It was also found that WSF addition resulted an increase in adhesiveness of wet noodle and decrease in hardness and strengthness of cooked noodle.