참고문헌
- Yoshihiro Tomita and Takeshi Iwamoto, 1995, "Constitutive modeling of trip steel and its application to the improvement of mechanical properties", Int. J. Mech. Sci. Vol. 37, No. 12, pp. 1295-1305. https://doi.org/10.1016/0020-7403(95)00039-Z
- He, N. and Wagoner, R. H., 1996, "Springback simulation in sheet metal forming", NUMISHEET '96, pp. 308-315.
- Leu, Daw-Kwei, 1997, "A simplified approach for evaluation bendability and springback in plastic bending of anisotropic sheet metals", Journal of Materials Processing Technology. Vol. 66, pp. 9-177. https://doi.org/10.1016/S0924-0136(96)02453-3
- Samuel, M., 2000, "Experimental and numerical prediction of springback and side wall curl in Ubendings of isotropic sheet metals", Journal of Materials Processing Technology. Vol. 1.5, pp. 382-393.
- Hazek, V. V. and Lange, K., 1990, "Use of Slip Line Field Method in Deep Drawing of Large Iirregular Shaped Components", Proc. of 7th NAMRC, Ann Arbor, Michigan, pp. 65-71.
- Chu, J. Y. and Dou, A. P., 1990, "A Software System for Designing Reasonable Blank for Boxshaped Deep-drawn Articles", Proc. of ICTP, Vol.3, pp. 1319-1324.
- 이진희, 강범수, 김병민, 1995, "강-소성 유한요소 해석에서의 3 차원 역추적 기법에 관한 연 구", 한국소성가공학회지, 제 4 권, 제 3 호.
- Barlat, F., Chung, K. and Richmond, O., 1994, "Anisotropic Plastic Potentials for Polycrystals and Application to the Design of Optimum Blank Shapes in Sheet Forming", Metallurgical and Materials Transactions A, Vol25A, pp. 1209-1216.
- 김세호, 허 훈, 2002, "직접미분 설계민감도 해석을 이용한 박판금속성형 공정변수 최적화-설계민감도 해석", 대한기계학회 논문집 A, Vol. 26, No. 11, pp. 2245-2252. https://doi.org/10.3795/KSME-A.2002.26.11.2245
- 김세호, 허 훈, 2002, "직접미분 설계민감도 해석을 이용한 박판금속성형 공정변수 최적화-공전변수 최적화", 대한기계학회 논문집 A, Vol. 26, No. 11, pp. 2262-2269. https://doi.org/10.3795/KSME-A.2002.26.11.2262
- Lee, C. H. and Huh, H., 1997, "Blank Design and Strain Prediction of Automobiles Stamping Parts by an Inverse Finite Element Approach", J. Mat. Proc. Tech. Vol. 63, pp. 645-650. https://doi.org/10.1016/S0924-0136(96)02700-8
- Iseki, H. and Sowerby, R., 1995, "Determination of the Optimum Blank Shape when Deep Drawing Non-axisymmetric Cups Using a Finite Element Method", JSME International Journal. Series A, Vol. 38, No 4, pp. 125-135.
- Kim, J. Y., Kim, N. S. and Huh, M. S., 1998, "Optimum Blank Design of Automobile Sub-Frame", Korean Society for Technology of Plasticity Spring Annual Meeting. pp. 185-195.
- 심현보, 손기찬, 황현태, 2000, "민감도법을 이용한 최적블랭크 설계법의 일반적인 모양의 금형에서 적용", 한국소성가공학회지, 제 9 권, 제 3 호.
- 양우열, 이승열, 금영탁, 2002, "스프링백 저감을 위한 초기블랭크 설계", 한국자동차공학회지, 추계학술대회 초록집, p. 509.
- 양우열, 이승열, 금영탁, 2003, "스프링백 저감을 위한 초기블랭크 설계", 한국소성가공학회지, 제 12 권, 제 3 호, pp. 208-213. https://doi.org/10.5228/KSPP.2003.12.3.208
피인용 문헌
- A Study on the Springback of High-Strength TRIP Steel vol.13, pp.5, 2004, https://doi.org/10.5228/KSPP.2004.13.5.409
- Bead Optimization to Reduce Springback of Sheet Metal Forming using High Strength Steel vol.23, pp.4, 2014, https://doi.org/10.7735/ksmte.2014.23.4.350