An Experimental Study of Supersonic Dual Coaxial Free Jet

  • Baek, Seung-Cheol (Department of Mechanical Engineering, Kyungpook National University) ;
  • Kwon, Soon-Bum (Department of Mechanical Engineering, Kyungpook National University) ;
  • Lee, Byeong-Eun (Department of Aeronautical Engineering, Kyungpook National University)
  • Published : 2003.12.01

Abstract

A supersonic dual coaxial jet has been employed popularly for various industrial purposes, such as gasdynamic laser, supersonic ejector, noise control and enhancement of mixing. Detailed characteristics of supersonic dual coaxial jets issuing from an inner supersonic nozzle and outer sonic nozzles with various ejection angles are experimentally investigated. Three important parameters, such as pressure ratios of the inner and outer nozzles, and outer nozzle ejection angle, are chosen for a better understanding of jet structures in the present study. The results obtained from the present experimental study show that the Mach disk diameter becomes smaller, and the Mach disk moves toward the nozzle exit, and the length of the first shock cell decreases with the pressure ratio of the outer nozzle. It was also found that the highly underexpanded outer jet produces a new oblique shock wave, which makes jet structure much more complicated. On the other hand the outer jet ejection angle affects the structure of the inner jet structure less than the pressure ratio of the outer nozzle, relatively.

Keywords

References

  1. Addy, A. L., 1981, 'Effects of Axisymmetric Sonic Nozzle Geometry on Mach Disk Characteristics,' AIAA Journal, Vol. 19, No. 1, pp. 121-122 https://doi.org/10.2514/3.7751
  2. Chang, I. S. and Chow, W. L., 1974, 'Mach Disk from Underexpanded Axisymmetric Nozzle Flow,' AIAA Journal, Vol. 12, No.8, pp. 1079-1082 https://doi.org/10.2514/3.49415
  3. Crist, S., Sheerman, P. M. and Glass, D. R., 1966, 'Study of the Highly Underexpanded Sonic Jet,' AIAA Journal, Vol. 4, No.1, pp. 68-71 https://doi.org/10.2514/3.3386
  4. Crowe, J. J., 1942, 'Divergent Nozzle Tips for Economical Oxygen Cutting,' Journal of Weld, Vol. 21, pp. 34-40
  5. Davidor, W. and Penner, S. S., 1971, 'Shock Standoff Distances and Mach-Disk Diameters in Underexpanded Sonic Jets,' AIAA Journal, Vol. 9, No.8, pp. 1651-1653 https://doi.org/10.2514/3.6410
  6. Driftmyer, R. T., 1972, 'A Correlation of Freejet Data,' AIAA Journal, Vol. 10, No.8, pp. 1093-1095 https://doi.org/10.2514/3.50306
  7. Kim, H. D. and Lee, J. S., 1996, 'An Experimental Study on Supersonic Jet Issuing from Gas Atomizing Nozzle (I),' Journal of KSME, Vol. 20, No.2, pp. 697-709
  8. Masuda, W. and Nakamura, T., 1993, 'Effects of Nozzle Contour on the Aerodynamic Characteristics of Underexpanded Annular Impinging jets,' JSME Int. Journal, Vol. 36,No. 2,pp. 238-244 https://doi.org/10.1299/jsmeb.36.238
  9. Masuda, W. and Moriyama, E., 1994, 'Aerodynamic Characteristics of Underexpanded Coaxial Impinging Jets,' JSME Int!. Journal, Vol. 37, No.4, pp. 769-775 https://doi.org/10.1299/jsmeb.37.769
  10. Narayanan, A. K. and Damodaran, K. A., 1992, 'Mach Disk of Dual Coaxial Axisymmetric Jets,' AIAA Journal, Vol. 7, pp. 343-345
  11. Sherman, F. S., 1966, 'The Structure and Utilization of Supersonic Free jets in Low Density Wind Tunnels,' Rarefied Gas Dynamics, Vol. 2, pp. 84-105
  12. Werle, M. J., Shaffer, D. G. and Driftmyer, R. T., 1970, 'Freejet Terminal Shocks,' AIAA Journal, Vol. 8, No. 12. pp. 2295-2297 https://doi.org/10.2514/3.6113