Journal of Mechanical Science and Technology

  • 제17권12호
  • /
  • Pages.1904-1911
  • /
  • 2003
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Wear Behaviors of Ceramics TIN, TIC and TICN with Arc Ion Plating

  • Oh, Seong-Mo (Division of Mechanical Engineering, Wonkwang University) ;
  • Rhee, Bong-Goo (Division of Mechanical Engineering, Wonkwang University) ;
  • Jeong, Bong-Soo (Department of Mechanical Engineering Iksan National College)
  • 발행 : 2003.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In order to determine the wear properties of AIP (Arc Ion Plating) deposition, wear process was evaluated by using a Falex test machine. Also, in order to determine the effects of coating material on the wear process, TiC, TiN, and TiCN coatings of thickness about 5 $\mu\textrm{m}$∼6 $\mu\textrm{m}$ coated by Arc ion plating deposition method were tested. The wear property was determined under a dry sliding condition as a function of the applied load, sliding distance, sliding velocity and temperature. The results show that when wear of the coating-layer occurred, specific wear amount increased with the wear rate. At initial state, the wear rate rapidly increased, but it gradually reduced as the velocity increased. Also, when raising the temperature, the wear rate increased in the order of TiCN, TiN and TiC due to the frictional heat.

키워드

참고문헌

  1. Andersson, P., 1992, 'Water Lubricated Pin on Disc Tests with Ceramics,' Wear, Vol. 154, pp.37-47 https://doi.org/10.1016/0043-1648(92)90241-Y
  2. Barth, M., Ensinger, W., Schroer, A. and Wolf, G. K. Low temperature generation of hard material coatings by reactive ion beam assisted deposition, in : T.S. Sudarshan, D.G. Bhat (EDS.), Surface Modification Technologies III, TMS, Warrendale, 1990, p. 195
  3. Cho, J. G. and Choi, M. S., 1994, 'An Experimental Study of the Modified Chemical Vapor Deposition Process - Temperature Distribution and Particle Deposition Measurements,' Transactions of the Korean Society of Mechanical Engineers, Vol. 18, No. 11, pp.677-682
  4. Cuomo, J. J. and Rossnagel, S. M. Kaufman, H. R. (eds.), Handbook of Ion Beam Processing and Technology, Noyes, Park Ridge, NJ, 1989
  5. Dearnaley, G. and Hartley, N. E. W. Thin Solid Films 54 (1978) 215 https://doi.org/10.1016/0040-6090(78)90201-8
  6. Ensinger, W. and Schrber, A., 1998, 'Ion Beam Assisted Deposition of Carbide and Carbonitride of Titanium at low Substrate Temperature,' Surface and Coatings Technology 103-104, pp. 168-172 https://doi.org/10.1016/S0257-8972(98)00384-3
  7. Garside, B. L., Mter. Sci. Eng. A 13 (11) (1991) 179
  8. Halling, J., 1983, 'Thin Solid Films,' 108, pp. 103-115 https://doi.org/10.1016/0040-6090(83)90496-0
  9. Halling, J., 1983, Principles of Tribology, The MacMillan Press. Ltd
  10. Hirvonen, J. P., Mater. Sci. Rep. 6 (1991) 215 https://doi.org/10.1016/0920-2307(91)90008-B
  11. Hisakado, T., Suda, H. and Watanabe, H., 1992, 'The Friction and Wear Mechanisms Between Ceramics and Metals,' Wear, Vol. 155, pp.251-268 https://doi.org/10.1016/0043-1648(92)90085-M
  12. Hocking, M. G., Vasantasree, V. and Sidky, P. S., 1989, 'Metallic & Ceramic Coating, Longman Scientific & Technical,'
  13. Holmberg, K., Andersson, P. and Valli, J., 1987, 'Three Body Interaction in Metal-ceramic and Ceramic-ceramic Contacts,' Proc. 14th Leeds-Lyon Symp. on Tribology, pp.227-235
  14. Honlmberg, K. and Matthews, A., 1994, 'Coatings Technology Properties. Techniques and Applications in Surface Engineering,' pp.382-386
  15. Hubler, G.K., Mater. Sci. Eng. A115 (1994) 181 https://doi.org/10.1016/0921-5093(89)90677-1
  16. Lee, K. H. and Kim, K. W., 1994, 'Effect of Humidity and Sliding Speed on the Wear Behavior of Silicon Nitride Ceramics,' Transactions of the Korean Society of Mechanical Engineers, Vol. 18, No. 10, pp. 2597-2605
  17. Lee, Y. M. Son, H. S. and Kim, J. Y., 1996, 'Enhancenent of wear Resistance of TiN Coated High Speed Steel Tools Through Improving Some Coating Processes,' Journal of the Korean society of Precision Engineering, Vol. 13, No. 11, pp.32-37
  18. Oliver, W. C., Hutchings, R. and Pethica, J. B., Metall. Trans. A 159 (1984) 2221
  19. Peterson, M. B. and Winer, W.O., 1980, 'Wear Control Handbook,' The Am. Soc. Mech. Eng., p.894
  20. Rhee, B. G., 1995, 'A Study on the Lubricational Characteristics with Compound Additives of Engine Oil,' Journal of the Korean Society of Tribologist and Lubrication Engineers, Vol. 11, No.1, pp. 50-57
  21. Ruck, D. M., Schmidt, H., Angert, N., Yoda, O., Aoki, Y. and Naramoto, H., in: Proceedings of the Ninth International Conference on Ion Beam Modification of Materials, Canberra, Australia, 5-10 February 1995, p. 1016
  22. Schroer, A. and Ensinger, W., Surf. Coat. Technol. 84 (1996) 448 https://doi.org/10.1016/S0257-8972(95)02811-0
  23. Sioshansi, P., Oliver, R. W., Matthews, F. D. and Vac. Sci. J., Technol. A 3(6) (1985) 2670
  24. Smidt, F. A., Int. Mater. Rev. 35 (1990) 62
  25. Song, G. and Ahn, H. S., 1990, 'Wear Characteristics of TiN Coating by Plasma Enhanced CVD,' Journal of the KSLE, Vol. 6, No. I, pp. 116-125
  26. Tai, C. N., Koh, E. and Akari. K., 1990. 'Macroparticles on TiN Films Prepard by the Arc Ion plating Process,' Surface and coatings Technology, 43/44, pp. 324-335 https://doi.org/10.1016/0257-8972(90)90085-Q
  27. Vyskocil, J. and Musil, J., 1990, 'Arc Evaporation of Hard Coating: Process and Film Properties,' Surface and Coatings Technology, 43/44, pp. 299-311 https://doi.org/10.1016/0257-8972(90)90083-O