초록
3차원 의료영상처리와 같은 볼륨 가시화 분야에서는 균등한 볼륨보다 비균등한 볼륨이 많이 사용된다. 비균등한 볼륨은 3차원 직교공간에서 세축방향의 공간 해상도가 같지 않은 것을 가리킨다. 본 논문에서는 인접한 두 슬라이스상에 있는 복셀에서의 광도를 보간하여 중간 복셀의 광도를 직접 계산하는 효율적인 비균등한 볼륨 렌더링 방법을 제안한다. 기존의 밀도 보간법과 달리 여기서는 중간 슬라이스를 만들기 위해 전처리 과정을 거치지 않으며, 생성된 중간 슬라이스를 저장하기 위한 기억공간도 필요 없다. 이와 더불어 광도 보간법으로 공간 주파수가 높은 영역을 렌더링 할 때 발생할 수 있는 과도한 흐려짐 현상을 막기위해 적응형 중간 복셀 삽입법을 제안한다. 이 방법을 활용하면 일정한 화질을 유지하면서 렌더링 속도를 향상시킬 수 있다.
In some volume visualization fields such as medical imaging, anisotropic volume data are more common than isotropic ones. In this paper, we propose an efficient rendering method for anisotropic volume data, which directly computes the intensity of intermediate samples by interpolating the intensity of two corresponding voxels on consecutive slices. Unlike density interpolation method, it does not require a preprocessing step for generating intermediate slices or additional memory for storing them. Additionally, we propose an adaptive intermediate voxel insertion method that avoids overblurring on object surfaces. This may occur when we render high frequency areas using the intensity interpolation method. Using these methods, we can improve the rendering speed without sacrificing image quality.