Abstract
In this paper, a multiple U-shaped slot antenna on 5㎓ band is designed, fabricated, and measured. The prototype consists of a U-shaped slot and two Invert U-shaped slot. To obtain wide bandwidth, the foam layer is inserted between ground plane and substrate. After various parameters, length, width, position of U-shaped slot horizontal, interval length between two invert U-shaped slot, feeding position and airgap width, optimized, a multiple U-shaped slot antenna is fabricated and measured. The measured results of the antenna are compared with its simulated results. A 2:1 VSWR impedance bandwidth of 20.4% is achiedved by employing this technique. The gain is about 5.5㏈i. The experimental far-field patterns are stable across the pass band.
본 논문에서는 5㎓ 대역에서 동작하는 다중 V-슬롯 모양의 마이크로스트립 안테나를 설계하고 제작하였다. 단일 U-슬롯 모양 위에 두 개의 작은 역 U-슬롯 모양을 갖도록 하였으며 접지면과 기판사이에 공기층을 삽입하여 충분한 대역을 얻고자 하였다. 여러 파라메타, 큰 U 슬롯모양 가로 길이, 세로 길이, 너비, 위치 그리고 두 개의 역 U 슬롯 모양 간격, 급전 위치 그리고 공기갭의 두께를 최적화시킨 후에 다중 U-슬롯 모양의 마이크로스트립 안테나가 제작되었으며 제작된 안테나의 측정결과는 다음과 같다. VSWR<2.0에서 20.4%의 대역폭과 5.5㏈i의 이득과 방사패턴을 얻었다.