한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제20권12호
  • /
  • Pages.135-141
  • /
  • 2003
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

엔드밀링에서 등가 진동계 모델링

A Modeling Method of Equivalent Vibratory System in End Milling

  • 발행 : 2003.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

For the analysis of machined surface topography and machine-tool chatter, the cutting system is considered to be a single degree of freedom system. This paper presents a modeling method of equivalent vibratory system for precision cutting in end-milling using an impact test, an Autoregressive Moving Average (ARMA) mode] and a bisection method It has been shown that the proposed modeling method provides a good identification of the cutting system. The advantages of the proposed method in comparison to the existing method are that it is very easy and accurate.

키워드

참고문헌

  1. Tobias, S.A., Machine-Tool Vibration, John Wiley and Sons, 1965
  2. Smith, S., Tlusty, J., 'Stabilizing Chatter by Automatic Spindle Speed Regulation,' Ann. of CIRP, Vol. 41, pp. 433-436, 1992
  3. Tlusty, J., 'High Speed Machining,' Ann. of CIRP, Vol. 42, pp. 733-738, 1993
  4. Lee, S.Y., Kim, S.G., Lee, J.M., 'Analyses of Structural Dynamic Characteristics and End Milling in a Vertical Machining Center,' J. of the KSPE, Vol. 14, No. 3, pp. 66-74, 1997
  5. Montgomery, D., Altintas, Y., 'Mechanism of Cutting Force and Surface Generation in Dynamic Milling,' ASME J. of Eng. for Ind., Vol. 113, pp. 160-168, 1991
  6. Elbestawi, M.A., Ismail, F., Yuen, K.M., 'Surface Topography Characterization in Finish Milling,' Int. J. Mach. Tools Manufac., Vol. 34, No. 2, pp. 245-255, 1994 https://doi.org/10.1016/0890-6955(94)90104-X
  7. Baek, D.K., Ko, T.J., Kim, H.S., 'A development of the surface roughness model in face milling operation,' J. of the KSPE, Vol. 12, No. 12, pp. 149-156, 1995
  8. Wu, S.M., Pandit, S.M., Time Series and System Analysis with Applications, John Wiley and Sons, 1983
  9. Curtis, F.G., Patrick, O.W., Appied Numerical Analysis, Addison-Wesley Publishing Company, 1989