DOI QR코드

DOI QR Code

복합적층판 기계적 체결부에 대한 층간응력해석

Interlaminar Stress Analysis of the Mechanical Joint of the Composite Materials

  • 안용택 (한국선급 선체기술부) ;
  • 송관형 (충남대학교 선박해양공학과)
  • 발행 : 2003.12.01

초록

This method surely needs a hole that causes local strength and stiffness deterioration of the structure because of stress intensity. In this work, three dimensional stress analysis of pin-loaded joint for quasi-isotropic composite laminates was performed using commercial finite element software. Stress distribution was calculated near the edge of the pin-leaded hole and effects of the stacking sequence on the delamination were investigated. Also, the delamination strength of the composite laminates was predicted using the Ye-delamination failure criterion and compared with the experimental results. finally, newly modified failure criterion has been suggested owing to the consideration of effects of interlaminar normal stress on the delamination strength.

키워드

참고문헌

  1. Chen, W. H., Lee, S. S. and Yeh, J. T., 1995, "Three-Dimensional Contact Stress Analysis of a composite Laminate with Bolted Joint," Computers and Structures, Vol. 30, pp. 287-297, London, UK https://doi.org/10.1016/0263-8223(94)00041-7
  2. Ericson, K., Carlsson, P. L., and Gustavsson, A., 1984, " On the Prediction of the Initiation of Delamination in a [0/90]s Laminate with a Circular Hole," Journal of Composite Materials, Vol. 18, pp. 495-506, Thousand Oaks. CA, USA https://doi.org/10.1177/002199838401800508
  3. Gibson, R. F., 1994, "Principles of Composite Material Mechanics", New York, McGraw-Hill Book Company
  4. Hamada, H. and Maekawa, Z. I., 1996, "Strength Prediction of Mechanically Fastened Quasi-Isotropic Carbon/Epoxy Joints," Journal of Composite Materials, Vol. 30, pp. 1596-1612. Thousand Oaks, CA, USA https://doi.org/10.1177/002199839603001405
  5. Kim, D. M., 1990, Free-Edge Delamination in Advanced Composite Laminates, Ph. D. Thesis, Department of Aerospace Engineering, KAIST, Daejeon, ROK
  6. Kim, J. Y. and Hong, C. S., 1991, "Three-Dimensional Finite Element Analysis of Interlaminar Stresses in Thick Composite Laminates," Computers and Structures, Vol. 40, pp. 1395-1404, London, UK https://doi.org/10.1016/0045-7949(91)90410-N
  7. Kim, R. Y. and Soni, S. R., 1984, "Experimental and Analytical Studies on the Onset of Delamination in Laminated Composites," Journal of Composite Materials, Vol. 18, pp. 70-80, Thousand Oaks. CA, USA https://doi.org/10.1177/002199838401800106
  8. Lucking, W. M., Hoa, S. V. and Sankar, T. S., 1984, "The Effect of Geometry on Interlaminar Stresses of [0/90]s Composite Laminates with Circular Holes," Journal of Composite Materials, Vol. 18, pp. 188-198, Thousand Oaks. CA, USA https://doi.org/10.1177/002199838401800207
  9. Marshall, I. H., Arnold, W. S. and Wood, J., 1989, "Observations on Bolted Connections in Composite Structures," Composite Structures, Vol. 13, pp. 133-151, London, UK https://doi.org/10.1016/0263-8223(89)90051-2
  10. Oh, J. H., Kim, Y. G. and Lee, D. G., 1997, "Optimum Bolted Joints for Hybrid Composite Materials," Composite Structures, Vol. 38, pp. 329-341, London, UK https://doi.org/10.1016/S0263-8223(98)80014-7
  11. Park, H. J., 2000, Failure Analysis for Mechanically Fastened Joints in Composite Laminates, Ph. D. Thesis, Dept. of Mech. Eng., KAIST, Daejeon, ROK
  12. Quinn, W. J., 1977, "The Effect of Stacking Sequences on the Pin-Bearing in Class Fiber Reinforced Plastic," Journal of Composite Materials, Vol. 11, pp. 139-150, Thousand Oaks. CA, USA https://doi.org/10.1177/002199837701100202
  13. Smith, P. A. and Pascoe, K. J., 1986, "The Effect of Stacking Sequence on the Bearing Strengths of Quasi-Isotropic Composite Laminates," Composite Structures, Vol. 6, pp. 1-20, London, UK https://doi.org/10.1016/0263-8223(86)90065-6
  14. Song, K. H., 1990, "Damage Study on the Mechanical Fastening in Laminated Composites," Journal of the Society of Naval Architects of Korea, Vol. 27, pp. 58-66, Seoul, ROK
  15. ANSYS, ANSYS User's Manual for Revision 5.6, Volume IV