참고문헌
-
Nagpal, V. and Altan, T., 1975, "Analysis of the Three-Dimensional Metal Forming in Extrusion of Shapes with Use of Dual Stream Functions", Proc.
${3}^ {rd} North American Met. Res. Conf. Pittsburgh, Pennsylvania, pp. 26-40. - Nagpal, V., 1977, "On the Solution of Three Dimensional Metal Forming Processes", J. Eng. Ind. Trans. ASME Series B. Vol. 99, pp. 624-629. https://doi.org/10.1115/1.3439289
- Yang, D. Y, Kim, M. U. and Lee, C. H., 1978, "A New Approach for Generalized Three-Dimensional Extrusion of Sections form Round Billets by Conformal transformation", Proceedings of IUTAM Symposium, Tutzing, Germany, pp. 203-222.
- Gunasekera, J. S. and Hoshino, S., 1980, "Analysis of Extrusion of Non-Circular Sections through Shaped Dies", Annals of CIRP, Vol. 29, pp. 141-145. https://doi.org/10.1016/S0007-8506(07)61310-9
- Gunasekera, J. S., Gegel, H. L., Malas, J. C. and Doraivelu, S. M., 1982, "Computer Aided Process Modeling of Hot Forging and Extrusion of Aluminum Alloys", Annals of CIRP, Vol. 31, No. 1, pp. 131-136. https://doi.org/10.1016/S0007-8506(07)63283-1
- Yang, D. Y., Han, C. H. and Kim, M. U., 1986, "A generalized method for analysis of three-dimensional extrusion of arbitrarily shaped sections", Int. J. Mech. Sci., Vol. 28, pp. 517-534. https://doi.org/10.1016/0020-7403(86)90050-0
- Shin, H. W., Kim, D. W. and Kim. N. S., 1993, "A simplified three-dimensional finite-element analysis of the non-axisymmetric extrusion processes", Journal of Materials Processing Technology, Vol. 38, pp. 567-587. https://doi.org/10.1016/0924-0136(93)90071-D
- Joun, M. S. and Hwang, S. M., 1998, "Die shape Optimal Design in Three-Dimensional Shape Metal Extrusion by the Finite Element Method", Int. J. Num. Methods Eng., Vol. 41, pp. 311-335. https://doi.org/10.1002/(SICI)1097-0207(19980130)41:2<311::AID-NME286>3.0.CO;2-2
- Celik. K. F. and Chitkara, N. R., 2000, "Application of an upper bound method to off-centric extrusion of square sections, analysis and experiments", Int. J. Mech. Sci., Vol. 42, pp. 321-345. https://doi.org/10.1016/S0020-7403(98)00131-3
- Chitkara, N. R. and Celik. K. F., 2001, "Extrusion of non-symmetric T-shaped sections, an analysis and some experiments", Int. J. Mech. Sci., Vol. 43, pp. 2961-2987. https://doi.org/10.1016/S0020-7403(01)00044-3
- Celik, K. F. and Chitkara, N. R., 2002, "Extrusion of non-symmetric U-and I-shaped sections through ruled-surface dies : numerical simulations and some experiments", Int. J. Mech. Sci., Vol. 44, pp. 217-246. https://doi.org/10.1016/S0020-7403(01)00055-8
- 유동진, 임종훈, 2003, "B-스플라인 곡면기법을 이용한 압출 금형 곡면의 표현방법에 관한 연구" 한국소성가공학회지, 제 12 권, 제 2 호, pp. 142-150. https://doi.org/10.5228/KSPP.2003.12.2.142
- 유동진, 임종훈, 2003, "NURBS 곡면기법을 이용한 압출 금형 곡면의 표현방법에 관한 연구" 한국소성가공학회지, 제 12 권, 제 2 호, pp. 151-160. https://doi.org/10.5228/KSPP.2003.12.2.151
- 유동진, 권혁종, 임종훈, 2003, "NURBS 곡면과 면적사상법을 이용한 압축 금형 곡면의 표현 방법에 관한 연구" 한국소성가공학회지, 제 12 권, 제 4 호, pp. 348-357. https://doi.org/10.5228/KSPP.2003.12.4.348
- Les Piegl and Wayne Tiller, 1995, The NURBS Book, Springer.
- 유동진, 윤정환, 2000, "박판성형 해석을 위한 자동 툴 격자생성에 관한 연구" 한국소성가공학회지, 제 9 권, 제 2 호, pp. 140-151.
- Tirupathi R. Chandrupatla, Ashok D. Belegundu, 2002, Introduction to Finite Elements in Engineering.