참고문헌
- R. Cornwall, PIM Continues Its March to Maturity, MPR, 1998, 53(7/8),pp.32-33.
- R. M. Gerrnan and A. Bose, Injection Molding of Metals and Ceramics, MPIF, 1997.
- A. Bose, The Technology and Commercial Satstus of Powder-Injection Molding, JOM, 1995, 47(8), pp. 24-30.
- A. Bose, J.J. Valencia, J. Spirko and R. Schmees, Powder Injection Molding of Inconel 718 Alloy, Adv. in powder Metall. and Particulate Mater., 1997, vol. 3, MPIF, pp. 18.99-18.112.
- J.J. Valencia, T.J. McCabe and H. Dong, Microstructure and Mechanical Properties of Powder Injection Molded 17-4Ph Stainless Steel for Application in Aircraft Engine Components,Adv. in Powder Metall. and Particulate Mater., 1995, vol. 2, MPIF,pp.6.205-6.214.
- R.M. Schmees and J.J. Valencia, Mechanical Properties of Powder Injection Molded Inconel 718, 1998 Int. Conf. on Powder Metall. And Particulate Mater., Las Vegas, in Press.
- R.M. German, Technological Barriers and Opportunities in Powder Injection Molding, Powder Metall. Int, 1993, 25(4), pp. 165-169.
- R. Haynes, The Mechanical Bchaviour of Sintered of Sintered Metals, 1981, Freund Publ., London, UK.
- G.F. Bocchini, The Influences of Porosity on the Characterstics of Sintered Materials, Int.J. Powder Metall., 1986, vol. 22(3), pp. 185-202.
- M.J.Balshin, Poroshkovoye metallovegyeniye. Metallurgizdat. Moscow(1948).
- B.Ya. Pines, A.F.Sirenko, I.N.Suchinin, Issiedouaniya po zharo proischnym splavam. Izdat.Ak Nauk Udssr(1958) Vol.3.
- M. Eudier, "The mechanical properties of sintered low-alloy steel," Powder Metallurgy (1962)278.
- M. Eudier, Second European Symposium on Powder Metallurgy. Stutt(1968) Vol. 1.
- E. Ryshkevitch, J.Amer. Cer.,36 (1953)65. https://doi.org/10.1111/j.1151-2916.1953.tb12837.x
- W.Duckworth, J. Amer.Cer.Soc., 36(1953)68. https://doi.org/10.1111/j.1151-2916.1953.tb12838.x
- V. Gallina, G. Mannone, Powder Metallurgy (1968)73.
- K. K. Schiller, In Mechanical Properties of Non Metallic Brittle Materials. Edited by W. H. walton, Butterworths Sci. Publ. London (1956) 34.
- J.Krasovskiy, Poroshkovaya Metallurgiya (1964) No. 4, 1.
- R.Haynes, Powder Metallurgy (1971) 64.
- R.Haynes, Powder Metallurgy (1971) 71.
- E. Dudroua, J.Kubelik, Third Int. Powder Metallurgy Conf., Karlouy Vary (1970).
- E.Dudrova: Podroky prashkove metalurgiye VUPM (1971), No. 3, 25.
- F. P. Knudsen, J.Amer.Cer. Soc. 42 (1959) 376. https://doi.org/10.1111/j.1151-2916.1959.tb13596.x
- D. P. H. Hasselmann, R.M. Fulrath, J.Amer. Cer. Soc., 50 (1967) 399. https://doi.org/10.1111/j.1151-2916.1967.tb15143.x
- D. J. Millard, Discussion of Schiller's paper. Ref. (8) 45.
- N. I. Shtscherban, Poroshkocaya Metallurgiya (1973) No. 10, 70.
- G. H. Gessinger, H. Metzler, F. Esper, H. E. Exner, Powder Metallurgy (1971) 289.
- M.F. Aksit and D. Lee, A Lumped Parameter Analysis Powder Injection Molding, Int. J. Power Metall., 1995, vol. 31, pp. 351-363.
- C. I. Chung, B. O. Rhee, M. Y. Cao and C. X. Liu, Requirements for Binder for Powder Injection Molding, in Compendium on Metal Injection Molding II, MPIF, 1989, pp. 67-78.
- T.H. Kwon and S. Ahn, Finite Element Analysis of PIM Filling Process with Slip Characterisation of Poweder-Binder Mixtures, Powder Metall., 1998, 40(3), pp. 174-176.
- B.O. Rhee and Y.C. Jung, Bagleys Correction in Rheological Characterizaation of PIM Feedstocks, Adv. in Powder Metall. and Particulate Mater., 1997, vol. 3, MPIF, pp. 18.23-18.28.
- S. T. Lin and R. M. German, Extraction Debinding of Injection Molded Parts by Condensed Solvents, Powder Metall. Int. 1989, vol.21(5), pp. 19-24.
- R. M. German, Theory of Thermal Debinding, Int. J. Power Metall., 1987, vol.23(4), pp. 237-245.
- D. I. Bloemacher, MPR, vol.45(2), 1990, p. 117.
- A. Kimura, K. Nakabayashi and T.Shimura, MPR, vol. 45(2), 1990, p. 106.
- C. P. Ashdoun and R. J. Holland, Compendium on Metal Injection Molding II, MPIF, 1989, p. 35.
- F. V. Lenel, Powder Metallurgy-Principles and Applications, MPIF, 1980.
- R. Billet, Net-Shape Full Density P/M Parts by Injection Molding, New Perspective in Powder Metallurgy, Vol.8, MPIF, 1987, pp. 497-510.
- R. M. German and K. F .Hens, Identification of The Effects of Key Powder Characteristics on Powder Injection Molding, Powder Injection Molding Symposium-1992, MPIF,pp. 1-16.
- C. Lall, Fundamentals of High Temperature Sintering: Application to Stainless Steels and Soft Magnetic Alloys, Int.J. Powder Metall., 1991, vol.27(4),pp. 315-329.
피인용 문헌
- Material Properties Evaluation of 1-3 type Piezo-composite Fabricated with Ceramic Injection Molding Technology vol.48, pp.6, 2011, https://doi.org/10.4191/kcers.2011.48.6.648