Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Analysis of Torque on Spur Gear by Inverse Problem

역문제에 의한 평치차의 토크 해석

  • 박성완 (시립인천전문대학 기계설계과)
  • Published : 2003.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study proposed a technique for inverse problem, linear approximation of contact position and loading in single and double meshing of transmission contact element using 2-dimension model considered near the tooth by root stress. Determination of root stress is carried out far the gear tooth by finite element method and boundary element method. Boundary element discretization near contact point is carefully performed to keep high computational accuracy. The predicted results of boundary element method are good accordance with that of finite element method.

Keywords

References

  1. Trans. of JSME, Series C v.47 no.413 Research on Bending Strength Properties of Spur Gears with Thin Rim Arai,N.;Harada,S.;Aida,T.
  2. Trans. of JSME, Series C v.51 no.467 On Tooth Contact Marking and Gear Performance (1st Report, Fundamental Characteristics of Tooth Contact Marking) Kubo,A.;Ueno,T.;Jin,J.;Ariura,Y.;Nakanishi,T. https://doi.org/10.1299/kikaic.51.1559
  3. Trans. of JSME, Series C v.56 no.527 A Fundamental Study on Dynamic Behavior of Spiral Bevel Gear Arai,N.;Kawamoto,S.;Hirogaki,T. https://doi.org/10.1299/kikaic.56.1900
  4. Trans. of JSME, Series C v.56 no.530 A Fundamental Study on Dynamic Behavior of Spiral Bevel Gear(Case of Tapered Tooth Depth along Tooth Width) Arai,N.;Kawamoto,S.;Hirogaki,T.;Mizumoto,K. https://doi.org/10.1299/kikaic.56.2727
  5. Trans. of JSME, Series C v.56 no.532 Total Vibrational Excitation and TransmissionError of Gears as Index of Vibration and Noise of Power Transmissions Kubo,A.;Nonaka,T.;Kageyama,M.;Kato,N.;Kato,S.;Ohmori,T. https://doi.org/10.1299/kikaic.56.3404
  6. Trans. of JSME, Series C v.57 no.538 A Study of Spiral Bevel Gear(Analysis of Tooth Root Stress by Three Dimensional Finite Element Method) Arai,N.;Kawamoto,S.;Yoneda,H.;Hirogaki,T.;Mizumoto,K. https://doi.org/10.1299/kikaic.57.2114
  7. Trans. of JSME, Series C v.57 no.540 Characteristics of Meshing in Spiral Bevel Gears (Comparison of the Gleason-type Gear with the Oerlinko-type Gear) Arai,N.;Kawamoto,S.;Hirogaki,T.;Mizumoto,K.;Uenishi,Y. https://doi.org/10.1299/kikaic.57.2703
  8. ASME Trans. v.117 Evaluation of Gear Tooth Stresses by Finite Element Method Filit,I.H.;Eyercioglu,O.
  9. Trans. of JSME, Series C v.63 no.606 Method for Cutting Straight Bevel Gears Using Quasi-Complementary Crown Gears Tamura,H.;Ichino,K.;Kawasaki,K. https://doi.org/10.1299/kikaic.63.579
  10. Trans. of JSME, Series C v.63 no.608 Estimation of Impact Force on a Space Vehicle Based on an Inverse Analysis Technique Tanaka,H.;Ohkami,Y. https://doi.org/10.1299/kikaia.63.1172
  11. Boundary Element Techniques Brebbia,C.A.;Telles,J.C.F.;Wrobel,L.C.
  12. The Boundary Element Methods in Engineering Banerjee,P.K.
  13. Boundary Element Analysis in Engineering Continuum Mechanics Kane,J.H.
  14. Trans. of KSME v.18 no.6 A Study for Mutual Interference between Circular Inclusion and Crack in Finite-Width Plate by Boundary Element Method Park,S.O.
  15. Trans. of KSMTE v.10 no.5 Analysis of Spiral Bevel Gear by Inverse Problem Park,S.O.