A Numerical Investigation on the Wake Flow Characteristics and Rear-Spoiler Effect of a Large-Sized Bus Body

대형버스 바디모델의 후류특성 및 후미 스포일러 효과에 관한 해석적 고찰

  • 김민호 (기아자동차 상용연구소) ;
  • 국종영 (기아자동차 상용연구소) ;
  • 천인범 (기아자동차 상용연구소)
  • Published : 2003.03.01

Abstract

The aerodynamic characteristics of automobiles have received substantial interest recently. Detailed knowledge of the vehicle aerodynamics is essential to improve fuel efficiency and enhance stability at high-speed cruising. In this study, a numerical simulation has been carried out for three-dimensional turbulent flows around a commercial bus body. Also, the effect of rear-spoiler attached at rear end of bus body was investigated. The Wavier-Stokes equation is solved with SIMPLE method in general curvilinear coordinates system. RNG $k-\varepsilon$ turbulence model with the MARS scheme was used for the evaluating aerodynamic forces, velocity and pressure distribution. The results showed details of the three-dimensional wake flow in the immediate rear of bus body and the effect of rear-spoiler on the wake structure. A maximum of 14% reduction in drag coefficient was achieved for a model with a rear-spoiler.

Keywords

References

  1. K. P. Garry, 'Development of Container-Mounted Devices for Reducing the Aerodynamic Drag of Commercial Vehicles,' Journal of Wind Engineering and Industrial Aerodynamics, 1981
  2. K. P. Garry, J. L. Stollery, 'Reducing the Aerodynamic Drag of Commercial Vehicles,' International Journal of Vehicle Design, Vol.3, No.2,1982
  3. O. Baysal, I. Bayraktar, 'Computational Simulations for the External Aerodynamics of Heavy Trucks,' SAE 2000-01-3501, 2000
  4. J. Barlow, R. Guterres, R. Ranzenbach, 'Wake Structure of Rectangular Bodies with Radiused Edges Neat a Plane Surface,' SAE 1991-01-0648,1991
  5. J. Williams, J. Barlow, R. Ranzenbach, 'Experimental Study of CD Variation with Aspect Ratio,' SAE 1991-01-0649,1991
  6. A. J. Przekwas, 'Unstructured Adaptive Grid Solution Methodology for Automotive Aerodynamics,' SAE 970142, 1997
  7. K. Unida, K. Okumura, T. Kuriyama, 'The Development of Practical Aerodynamic Simulations,' SAE 9531516,1995
  8. Y. Takemori, S. Kato, Y. Masumitsu, T. Mizutani, 'Drag Reduction of Bluff-Based by Wake Control Vanes,' FISITA World Automotive Congress, F2000G357, 1992
  9. T. Fujimoto, A. Niinuma, K. Sakai, 'Shape Study for a Low- Air Resistance Air DeflectorThe Second Report,' SAE 950633,1995
  10. S. Perzon, J. Janson, L. Hoglin, 'On Comparison Between CFD Methods and Wind Tunnel Tests on a Bluff Body,' SAE 1999-01-0805,1999
  11. S.-F. Camara, 'On the Aerodynamic Analysis ofa Bus Model,' SAE 952265, 1995
  12. M.-M. Nassief, A.-F. EI-Sayed, 'An Investigation in to the Aerodynamics of the External Flow Around a Bus(Daewoo Model),' SAE 962173, 1996
  13. V. Yakhot, L. M. Smith, 'The Renormalization Group, The e-Expansion and Derivation of Turbulence Models,' J. Sci. Comput., Vol.1, No.3. 1986
  14. S. A. Orszag, 'Renormalization Group Modeling and Turbulence Simulations,' Proceedings of the Int. Conference on Near-Wall Turbulent Flows, Tempe, Arizona, U. S. A., 15-17 March, pp.1031-1046
  15. V. Yakhot, S. A. Orszag, 'Renormalization Group Analysis of Turbulence : 1. Basic Theory,' J. Sci. Comput., Vol.1, No.3. 1986
  16. W. T. Mason, P. S. Beebe, 'The Drag Related Flow Field Characteristics of Trucks and Buses,' in Aerodynamics Drag Mechanisms of Bluff Bodies and Road Vehicles, Plenum Press, 1978