참고문헌
- J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill,1988
- R. Meyer, J. B. Heywood, 'Effect of Engine and Fuel Variables on Liquid Fuel Transport into the Cylinder in Port-Injected SI Engines,' SAE 1999-01-0563, 1999
- Fulcher, Gajdeczko, Felton, Bracco, 'The Effects of Fuel Atomization, Vaporization, and Mixing on the Cold-Start UHC Emissions of a Contemporary S.l. Engine with Intake-Mani-fold Injection,' SAE 952482, 1995
- K. Takeda, T. Yaegashi, K. Sekiguchi, K. Saito, N. Imatake, 'Mixture Preparation and HC Emissions of a 4-Valve Engine with Port Fuel Injection During Cold Starting and Warmup,' SAE 950074,1995
- Henein, Tagomori, Yassine, Asmus, Thomas, Hartman, 'Cycle-by-cycle Analysis of HC Emissions During Cold Start of Gasoline Engines,' SAE 952402,1995
- N. Imatake, K. Saito, S. Morishima, S. Kudo, A. Ohhata, 'Quantitative Analysis of Fuel Behavior in Port-Injection Gasoline Engines,' SAE 971639, 1997
- Luan, Henein, 'Contribution of Cold and Hot Start Transients in Engine-out HC Emissions,' SAE 982645, 1998
- K. Saito, K. Sekiguchi, N. Imatake, K.Takeda, T. Yaegashi, 'A New Method to Analyze Fuel Behavior in a Spark Ignition Engine,' SAE 950044, 1995
- F. Zhao, M. Lai, D.L. Harrington, 'The Spray Characteristics of Automotive Port Fuel Injection-A Critical Review,' SAE 950506, 1995
- K. Horie, H. Takahasi, S. Akazaki, 'Emissions Reduction During Warm-Up Period by Incorporating a Wall-Wetting Fuel Model on the Fuel Injection Strategy During Engine Starting,' SAE 952478, 1995
- E. W. Kaiser, W. O. Siegl, G. P. Lawson, F. T. Connolly, C. F. Cramer, K. L. Dobbins, P. W. Roth, M. Smokovitz, 'Effect of Fuel Preparation on Cold-Start Hydrocarbon Emissions from a Spark-Ignited Engine,' SAE 961957, 1996
- G. J. Yoon, 'Developing Trend on the Gasoline ULEV Technology,' Journal of KSAE Vol.20, No.2, pp.26-35, 1998
- H. J. Nuglish, S. Nally, 'Atomization versus Targeting for Port Fuel Injectors : A Unresolvable Conflict,' 7th ICLASS, Seoul, 1997
- F. Zimmermann, J. Bright, W. Ren, B. Imohl, 'An Internally Heated Tip Injector to Reduce HC Emissions During Cold-Start,' SAE 199901-0792, 1999
- Y. M. Woo, Y. P. Lee, C. S. Bae, 'An Experimental Study on the Effect of Port Fuel Injection Characteristics upon HC Emission at Cold Start Condition,' Autumn Conference of KSAE, pp.22-27, 1999
- L. W. Evers, P. M. Tampas, R. L. Whipple, M. W. Fried, 'An Automated Patternator for Fuel Injector Sprays,' SAE 960108, 1996
- J. McGee, E. Curtis, S. Russ, G. Lavoie, 'The Effects of Port Fuel Injection Timing and Targeting on Fuel Preparation Relative to a Pre-Vaporized System,' SAE 2000-01-2834, 2000
- S. Park, J. Lee, Y. Shin, 'Effect of Fuel Evaporation from the Intake Valve Surface on the Mixture Preparation,' The Third ASPCC, June 24-27, Seoul, Korea, 2001
- J. Cowart, W. Cheng, 'Intake Valve Thermal Behavior During Steady-State and Transient Engine Operation,' SAE 1999-01-3643, 1999
- A.C. Alkidas, 'Intake-Valve Temperature and the Factors Affecting It,' SAE 971729, 1997