제어로봇시스템학회논문지 (Journal of Institute of Control, Robotics and Systems)

  • 제9권11호
  • /
  • Pages.874-882
  • /
  • 2003
  • /
  • 1976-5622(pISSN)
  • /
  • 2233-4335(eISSN)
제어로봇시스템학회 (Institute of Control, Robotics and Systems)
권호 표지
DOI QR코드

DOI QR Code

진동 신호 이용 모델 기반 모터 결함 검출 시스템 개발

Development of a Model-Based Motor Fault Detection System Using Vibration Signal

  • 임호순 (전북대학교 전자정보공학부) ;
  • ;
  • 정길도 (전북대학교 전자정보공학부)
  • ;
  • A.G. Parlos ;
  • 발행 : 2003.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The condition assessment of engineering systems has increased in importance because the manpower needed to operate and supervise various plants has been reduced. Especially, induction motors are at the core of most engineering processes, and there is an indispensable need to monitor their health and performance. So detection and diagnosis of motor faults is a base to improve efficiency of the industrial plant. In this paper, a model-based fault detection system is developed for induction motors, using steady state vibration signals. Early various fault detection systems using vibration signals are a trivial method and those methods are prone to have missed fault or false alarms. The suggested motor fault detection system was developed using a model-based reference value. The stationary signal had been extracted from the non-stationary signal using a data segmentation method. The signal processing method applied in this research is FFT. A reference model with spectra signal is developed and then the residuals of the vibration signal are generated. The ratio of RMS values of vibration residuals is proposed as a fault indicator for detecting faults. The developed fault detection system is tested on 800 hp motor and it is shown to be effective for detecting faults in the air-gap eccentricities and broken rotor bars. The suggested system is shown to be effective for reducing missed faults and false alarms. Moreover, the suggested system has advantages in the automation of fault detection algorithms in a random signal system, and the reference model is not complicated.

키워드

참고문헌

  1. P. J. Tavner and J. Penman, Condition monitoring of electrical machines, Letchworth, UK: Research Studies Press, 1987
  2. P. Vas, Parameter estimation. condition monitoring and diagnosis of electrical machines, Clarendron Press, Oxford, 1993
  3. G. B. Kliman and J. Stein, 'Induction motor fault detection via passive current monitoring,' International Conference in Electrical Machines, Cambridge, MA, pp. 13-17, August, 1990
  4. J. Penman, M. N. Dey and J. R. Smith, ' A new approach to the protection of industrial drives,' in Conference Record of the 17th Annual IAS Meeting, pp. 1226-1270, Piscatway, New Jersey: IEEE Press, September, 1982
  5. J. Sottile and J. L. Kohler, 'An on-line method to detect incipient failure of turn insulation in random wound motors,' IEEE Transactions on Energy Conversion, vol. 8, no. 4, pp. 762-768, December, 1993 https://doi.org/10.1109/60.260992
  6. G. B. Kliman, W. J. Premerlani, R. A. Koegl and D. Hoewler, 'A new approach to on-line turn fault detection in AC motors,' in Proc. Of IEEE-IAS Annual Meeting, pp. 687-693, San Diego, Califomia, October, 1996 https://doi.org/10.1109/IAS.1996.557113
  7. R. R. Schoen, T. G. Habetler, F. Kamran and R. G. Bartheld, 'Motor bearing damage detection using stator current monitoring,' IEEE Transactions on Industry Applications, vol. 31, no. 6, pp. 1274-1279, November/December, 1995 https://doi.org/10.1109/28.475697
  8. M. Benbouzid, 'A review of induction motors signature analysis as a medium for faults detection,' IEEE Transactions on Industrial Electronics, vol. 47, no. 5, pp. 984-993, October, 2000 https://doi.org/10.1109/41.873206
  9. F. Filippetti, G. Franceschini, C. Tassoni and P. Vas, 'Recent development of induction motor drives fault diagnosis using AI techniques,' IEEE Transactions on Industrial Electronics, vol. 47, no. 5, pp. 994-1004, October, 2000 https://doi.org/10.1109/41.873207
  10. Y. Zhang, J. Jiang, M. Flatley and B. Hill, 'Condition monitoring and fault detection of a compressor using signal processing techniques,' Proceedings of the American Control Conference, Arlington, VA June, 2001 https://doi.org/10.1109/ACC.2001.945681
  11. R. Barron, Engineering condition monitoring, Longman, Essex, England, 1996
  12. J. Courrech, Condition monitoring of machinery, in C. M. Harris, editor, Shock and Vibration Handbook (4th Ed.), pp. 16.1-16.26, McGraw-Hill, 1996
  13. A. Dimarogonas, Vibration for Engineers (2nd), Prentice Hall, Upper Saddle River, NJ, 1996
  14. R. Du, M. A. Elbestawi and S. M. Wu, 'Automated monitoring of manufacturing processes, part 1: Monitoring methods; part 2: Applications', Journal of Engineering for Industry, 117 :121-141, 1995 https://doi.org/10.1115/1.2803286
  15. S. Edwards, A. W. Lees and M. I. Friswell, 'Fault diagnosis of rotating machinery,' The Shock and Vibration Digest, 30( 1): 4-13, 1998 https://doi.org/10.1177/058310249803000102
  16. K. S. Kim and A. G. Parlos, 'Sensorless fault diagnosis of induction motors', PhD Paper of Nuclear Engineering Texas A&M University, May, 2001
  17. K. S. Kim and A. G. Parlos, 'Induction motor fault diagnosis based on neuropredictors and wavelet signal processing', IEEE/ASME Transactions on Mechatronics, vol. 7, no. 2, June, 2002 https://doi.org/10.1109/TMECH.2002.1011258
  18. A. G. Parlos, K. S. Kim and R. Bharadwaj, 'Detection of induction motor faults-combining signal-based and model-based techniques', Proceedings of the American Control Conference, Anchorage, AK. May 8-10, 2002 https://doi.org/10.1109/ACC.2002.1025365
  19. P. F. Albrecht, J. C. Appiarius, R. M. McCoy, E. L. Owen, and D. K. Sharma, 'Assessment of the reliability of motors in utility applications - updated,' IEEE Transactions on Energy Conversion, vol. EC-1, no. 1, pp. 39-46, March, 1986 https://doi.org/10.1109/TEC.1986.4765668
  20. IAS Motor Reliability Working Group, 'Report of large motor reliability survey of industrial and commercial installations, part I,' IEEE Transactions on Industry Applications, vol. IV-21, no. 4, pp. 853-864, July, 1985 https://doi.org/10.1109/TIA.1985.349532
  21. G. B. Kliman, R. A. Koegl, J. Stein, R. D. Endicott and M. W. Madden, 'Noninvasive detection of broken rotor bars in operating induction motors,' IEEE Transactions and Power Systems, vol. 20, no. 5, pp. 873-879, December, 1988 https://doi.org/10.1109/60.9364
  22. J. R. Cameron, W. T. Thomson and A. B. Dow, 'On-line current monitoring of induction motors - A method for calculating the level of air-gap eccentricity,' in IEE 3rd International Conference on Electric Machines and Drivers, pp. 173-177, IEE Publication no. 282, November, 1987
  23. P. Torasso and L. Console, Diagnostic Problem Solving, Oxford, UK: North Oxford Academic, 1989
  24. L. F. Pall, 'Survey of expert systems for fault detection, test generation, and maintenance,' Expert Systems, vol. 3, no. 2, pp. 100-111, April, 1986 https://doi.org/10.1111/j.1468-0394.1986.tb00199.x
  25. K. A. Loparo, N. Afshari and M. M. Abdel, 'Fault detection and diagnosis in rotating machinery,' in Proc. of the 1998 IEEE Int. Conf. On Systems, Man and Cybernetics, pp. 2986-2991, San Diego, CA, 1998 https://doi.org/10.1109/ICSMC.1998.725118
  26. R. G. Smiley, 'Rotating machinery: Monitoring and fault diagnosis,' Sound and Vibration, pp. 26-28, Sept. 1983
  27. P. M. Frank, 'Robust model-based fault detection in dynamic systems,' in On-Line Fault Detection and Supervision in the Chemical Process Industries. P. S. Dhurjati and G. Stephanopoulos, Ed., Oxford, UK: Pergamon Press, 1993, vol. 1, pp.1-13
  28. Y. M. Zhang and J. Jiang, 'Design of integrated fault detection, diagnosis and reconfigurable control systems,' in Proceeding of the 38th IEEE Conf. on Decision and Control, pp. 3587-3592, Phoenix, AZ, Dec. 7-10,1999 https://doi.org/10.1109/CDC.1999.827909