대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제27권10호
  • /
  • Pages.1472-1479
  • /
  • 2003
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

마이크로 제트를 이용한 과소팽창 음속 제트에서의 소음저감

Noise Reduction of an Underexpanded Supersonic Jet via Steady Blowing with Microjets

  • 김진화 (서울대학교 기계항공공학부) ;
  • 김정훈 (서울대학교 기계항공공학부) ;
  • 유정열 (서울대학교 기계항공공학부)
  • 발행 : 2003.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An attempt to reduce supersonic jet noise is carried out by using two steady microjets in a round jet. The jet is issued from a round sonic nozzle with an exit diameter of 10 mm. Two micro-nozzles with an inside diameter of 1 mm each are installed on the exit plane at an angle of 45 relative to the main jet axis. Far-field noise was measured at 40 diameters off the jet axis. The angle between a microphone and the jet axis is 30 or 90$^{\circ}$. For an injection rate of 4-6% of the main jet, screech tones were completely suppressed by the microjets. The reduction in the overall sound pressure levels were 2.4 and 2.7 dB for 90 and 30 measuring directions, respectively. However, the enhancement of mixing/spreading of the jet by the microjet was negligible. The reduction of noise is probably due to distorted shock cell structures and/or deformed large scale vortical structures by the microjets.

키워드

참고문헌

  1. Ahuja, K.K. and Brown, W.H., 1989, 'Shear Flow Control by Mechanical Tabs,' AIAA Paper 89-0994
  2. Samimy, M., Zaman, K.B.M.Q., and Reeder, M.F., 1993, 'Effect of Tabs on the Flow and Noise Field of an Axisymmetric Jet,' AIAA Journal, Vol. 31, No. 4, pp. 609-619 https://doi.org/10.2514/3.11594
  3. Raman, G., 1996, 'Screech Tones from Rectangular Jets with Spanwise Oblique Shock-Cell Structure,' AIAA Paper 96-0643
  4. Samimy, M., Kim, J.-H., Clancy, P.S., and Martens, S., 1998, 'Passive Control of Supersonic Jets via Nozzle Trailing Edge Modifications,' AIAA Journal, Vol.36, No.7, pp.1230-1239 https://doi.org/10.2514/2.504
  5. Kim, J.-H. and Samimy, M., 1999, 'Mixing Enhancement via Nozzle Trailing Edge Modifications in a High Speed Rectangular Jet,' Physics of Fluids, Vol.11, No.9, pp.2731-2742 https://doi.org/10.1063/1.870132
  6. Kerechanin Ⅱ, C. W., Samimy, M. and Kim, J.-H., 2001, 'Effects of Nozzle Trailing Edges on Acoustic Field of Supersonic Rectangular Jet,' AIAA Journal, Vol.39, No.6, pp.1065-1070 https://doi.org/10.2514/2.1418
  7. Davis, M.R., 1982, 'Variable Control of Jet Decay,' AIAA Journal, Vol.20, No.5, pp.606-609 https://doi.org/10.2514/3.7934
  8. Raman, G, 1997, 'Using Controlled Unsteady Fluid Mass Addition to Enhance Jet Mixing,' AIAA Journal, Vol.35, No.4, pp.647-656 https://doi.org/10.2514/2.185
  9. Ibrahim, M.K., Kunimura, R., and Nakamura, Y., 2002, 'Mixing Enhancement of Compressible Jets by Using Unsteady Microjets as Actuators,' AIAA Journal Vol.40, No.4, pp.681-688 https://doi.org/10.2514/2.1700