A Comparative Study of Leakage Flow Models for Scroll Compressors with CFD Solutions

스크롤 압축기 누설 모델의 CFD 해와의 비교 연구

  • Published : 2003.10.01

Abstract

The present paper studies the leakage flow model used in the performance prediction of a scroll compressor. Two leakage flow models, isentropic and Fanno flow model, are studied in detail. Their predictions are also compared with CFD solutions to check the validity as a leakage flow model. Comparison with CFD solutions shows that the isentropic flow model predicts excessive leakage flow rate, while the Fanno flow model shows acceptable agreement with CFD solutions. The excessive leakage flow rate by isentropic flow model results in under-prediction of the overall performance of a scroll compressor.

Keywords

References

  1. Proceedings of 1988 International Compressor Engineering Conference at Purdue A computer model for scroll compressor Caillat,J.L.;Ni,S.;Daniels,M.
  2. Proceedings of 1984 International Compressor Engineering Conference at Purdue Scroll compressor analytical model Morishita,E.;Sugihara,M.;Inaba,T.;Nakamura,T.
  3. Proceedings of 1986 International Compressor Engineering Conference at Purdue Computer modeling of scroll compressor with self adjustion back pressure mechanism Tojo,K.;Ikegawa,M.;Maeda,N.;Machida,S.;Shiibayashi,M.
  4. KSME J., B v.21 no.1 Performance analysis of a scroll compressor considering quasi one-dimensional leakage modeling and heat transfer loss Kang,T.G.;Park,K.W.;Park,H.Y.;Chung,Y.G.
  5. KSME J., B v.22 no.11 Effect of geometric parameters on the performance of an automotive scroll compressor using R-134a Lee,G.H.;Kim,H.S.;Cho,K.N.;Yoo,J.Y.
  6. Proceedings of 1986 International Compressor Engineering Conference at Purdue A scroll compressor with sealing means and low pressure side shell Inaba,T.;Sugihara,M.;Nakamura,T.;Kimura,T.;Morishita,E.
  7. Preceedings of 1996 International Compressor Engineering Conference at Purdue Refrigerant leakage flow evaluation for scroll compressors Ishii,N.;Bird,K.;Sano,K.;Oono,M.;Iwamura,S.;Otokura T.
  8. International Journal of Refrigeration v.8 no.2 Leakage losses with a rolling piston type rotary compressor Yanagisawa,T.;Shimizu,T.
  9. Proceedings of 2002 International Compressor Engineering Conference at Purdue v.C20-5 Effects of leakage flow model on the thermodynamic performance of a scroll compressor Kang,D.J.;Kim,J.W.;Sohn,C.B.
  10. Proceedings of 1994 International Compressor Engineering Conference at Purdue A calculating method for gas leakage in compressor Zhen,F.;Zhiming,C.
  11. Proceedings of 1998 International Compressor Engineering Conference at Purdue Quasi one-dimensional steady state models for gas leakage Prins,J.;Ferreira,C.A.I.
  12. Proceedings of 1998 International Compressor Engineering Conference at Purdue An analytical model for the discharge process in scroll compressors Myszka,D.H.
  13. KACRE J. v.13 no.9 Characteristics of flank and tip seal leakage in a scroll compressor for air-conditioners Youn,Y.;Kim,Y.C.;Min,M.K.