References
- Duncan, J. L., Goni, E. Johnson, W. 1967," Measurement of normal plastic anisotropy in steel metal", The J of the Australian Institute of Metals, Vol. 12, No. 2, pp. 127-138.
- I.D.D.R.G. Working GroupⅡ, Brief Report of the Joint Research Work, Liege, June 1966.
- Marinelli, S. V., June 1966, I.D.D.R.G Document, Liege.
- Fukui, S. and Tana, N., June 1966, I.D.D.R.G.Document, Liege.
- Fukui, S. and Yoshida, K., 1964, Sci. Papers Inst. Phys. Chem. Research, Japan, 58, p 1.
- Oween, L. J., Sidey, M. P. and Atkinson, M., "Automatic measurement of r values", June 1971, Sheet metal industries, pp. 476-482.
- Jeong, H. T. and Lee, D. N., 1977, "Variation in the plastic strain ratio with tensile strain", J. of the Korean Inst. of Met. & Mater. V. 35, No. 5, pp. 550-557.
- Liu, Y. C., 1983, "On the R value measurement", Metall. Trans. A. 14A, pp. 1199-1205.
- Jegaden, G., Voinchet, J. and Rocquet, P. April 1966, I.D.D.R.G. Document.
- Jegaden, G., Voinchet, J. and Rocquet, P. 1962, 4187, Letter, Nature, p. 771. https://doi.org/10.1038/193771a0
- Kim, I., Private Experiment.
-
Hu, H., April 1975, "The strain dependence of plastic strain ratio(
$r_{m}$ -value) of deep drawing sheet steels determined by simple tension test", Metallurgical Transactions A, 6A, pp. 945-947. https://doi.org/10.1007/BF02672326 - Hu, H., December, 1975, "Effect of plastic strain on the r value of textured steel sheet", Metallurgical Transactions A, 6A, pp. 2307-2309. https://doi.org/10.1007/BF02818661
- Hu, H., June 1976, "Discussion of influence of strain on the plastic strain ratio in cubic metals", Metallurgical Transactions A, 7A, pp. 905-906. https://doi.org/10.1007/BF02644095
- Hu, H., July 1983, ibid, "on the strain dependence of plastic strain ratio of deep drawing sheet steels", 14A, pp. 1521-1523. https://doi.org/10.1007/BF02664840
- Arthey, R. P. and Hutchinson, W. B., October 1981, "Variation of plastic strain ratio with strain level in steels", Metallurgical Transactions A, 12A, pp. 1817-1822. https://doi.org/10.1007/BF02643764
- Liu, Y. C., June 1983, "On the R Value measurement" Metallurgical Transactions A, 14A pp. 1199-1205. https://doi.org/10.1007/BF02670457
- Liu, Y. C. December 1983, ibid, "On the determination of Hill's plastic strain ratio", 14A, pp. 2566-2567. https://doi.org/10.1007/BF02668901
- Liu, Y. C. and Johnson, I., K., Agurst 1985, "Hill's plastic strain ratio of sheet metals", Metallurgical Transactions A, 16A, pp. 1531-1535. https://doi.org/10.1007/BF02658687
- Lake, J. S. H., Willis, D. J. and Fleming, H. G., November 1988, "The variation of plastic anisotropy during straining", Metallurgical Transactions A, 19A, pp. 2805-2817. https://doi.org/10.1007/BF02645815