DOI QR코드

DOI QR Code

An Elastoplastic Analysis for Spent Nuclear Fuel Disposal Container and Its Bentonite Buffer: Asymmetric Rock Movement

고준위폐기물 처분장치 및 완충장치에 대한 탄소성해석 : 비대칭 암반력

  • Published : 2003.08.01

Abstract

This paper presents an elastoplastic analysis for spent nuclear fuel disposal container and its 50 cm thick bentonite buffer to predict the collapse of the container while the horizontal asymmetric sudden rock movement of 10 cm is applied on the composite structure. This sudden rock movement is anticipated by the earthquake etc. at a deep underground. Elastoplastic material model is adopted. Drucker-Prager yield criterion is used for the material yield prediction of the bentonite buffer and von-Mises yield criterion is used for the material yield prediction of the container. Analysis results show that even though very large deformations occur beyond the yield point in the bentonite buffer, the container structure still endures elastic small strains and stresses below the yield strength. Hence, the asymmetric 50 cm thick bentonite buffer can protect the container safely against the 10 cm sudden rock movement by earthquake etc.. Analysis results also show that bending deformations occur in the container structure due to the shear deformation of the bentonite buffer. The finite element analysis code, NISA, is used for the analysis.

Keywords

References

  1. Ahonen, L., 1995, “Chemical Stability of Copper Canisters in Deep Repository," Report YJT­ 94­13, Nuclear Waste Commission of Finnish Power Companies, Helsinki, p, 101.
  2. Anttila, M., 1996, "Criticality Safety Calculations for the Nuclear Waste Disposal Canisters", Report POSIVA-96-11, Posiva Oy, Helsinki.
  3. Anttila, M , 1999, “Criticality Safety Calculations of the Nuclear Waste Disposal Canisers for Twelve Spent Fuel Assemblies," Working Report 99 03, Posiva Oy, Helsinki, p. 20.
  4. Auerkari, P. and Holmstrom, S., 1997, “Long-term Strength of EB Welds of the Canister for Nuclear Fuel Disposal," Working Report 97-35e, Posiva Oy, Helsinki, p. 21.
  5. Borgesson, L., 1992, “Interaction between Rock, Bentonite Buffer and Canister. FEM Calculations of Some Mechanical Effects of Canister in Different Disposal Concepts," Technical Report TR 92-20, Swedish Nuclear Fuel and Waste Management Co.(SKB), Stockholm. p. 83 + appendixes, ISSN 0284-3757.
  6. Choi, J. W., Choi, Y. S., Kwon, S. K., Kuh, J. E., Kang, C. H., 1999, “Technology Assessment of the Repository Alternatives to Establish a Reference HLW Disposal Concept," Journal of the Korean Nuclear Society, Vol. 31, Number 6, pp. 83-100.
  7. 장동환, 조승한, 황병복, 2003, “축대청 변형체의 마찰접촉문제에 관한 유한요소 해석," 한국소성가공학회지, 제12권 제1호, pp. 26-33.
  8. 권영주, 김재희, 1999, "액체금속로 핵연료교환장치의 구조해석Ⅰ: 기구동역학해석," 한국전산구조공학회논문집, 제12권, 제4호, pp. 573-581.
  9. 권영주, 강신욱, 2002, “가압경수로 고준위페기물 처분장치 외곽 쉘에 대한 비선형 구조해석," 홍익대학교 논문집, 산업기술, 제12집, pp. 131-139.
  10. 김영석, 손현성, 한수식, 2002, "튜브 하이드로포밍 공정에서의 마찰특성에 관한 연구," 한국소성가공학회지, 제11권 제6호, pp. 475-481.
  11. Kwon, Y.J., Kang, S.U., Choi, J.W., and Kang, C.H., 2001, "Structural Analysis for the Determination of Design Variables of Spent Nuclear Fuel Disposal Canister," KSME International Journal, Vol. 15, No. 3, pp. 327-338.
  12. Raiko, H. and Salo, J. P., 1992, “The Design analysis of ACP-Canister for Nuclear Waste Disposal," Report YJT-92 05, Nuclear Waste Commission of Finnish Power Companies, Helsinki, Finland.
  13. Raiko, H. and Salo, J. P., 1996, “Design Heport of the Canister for Nuclear Fuel Disposal," Report POSIVA 96 13, Posiva Oy, Helsinki, ISBN 951 652-012-X, Finland.
  14. Raiko, H. and Salo, J. P., 1999, "Design Report of the Disposal Canister for Twelve Fuel Assemblies," Report Posiva-99-18, Posiva Oy, Helsinki, Finland.
  15. Salo, J. P. and Raiko, H. 1990, “The Copper/Steel Canister Design for Nuclear Waste Disposal," TVO/KPA Turvallisuus Ja Tekniikka, Work Report 90 10, Rev. 1., Teollisuuden Voima Oy, Helsinki. Finland.
  16. Vieno, T. and Nordman, H., 1999, “Safety Assessment of Spent Fuel Disposal Canister in Hastholmen, Kivetty, Olkiluoto and Romuvaara TILA-99," Report POSNA 99-07, Posiva Oy, Helsinki, p. 253.
  17. Werme, L. and Eriksson, J., 1995, “Copper Canister with Cast Inner Component," Technical Report TR -95- 02, Swedish Nuclear Fuel and Waste Management Co. (SKB), Stockholm, Sweden, ISSN 0284-3757.