Effects of Cutting Angle on Kerf width and Edge Shape in the Hotwire Cutting of EPS Foam for the Case of Single-Sloped Cutting for VLM-s Process

VLM-s 공정을 위한 EPS 폼의 단순 경사 열선 절단시 절단 경사각이 절단폭과 모서리 형상에 미치는 영향

  • 안동규 (조선대학교 공과대학 기계공학과) ;
  • 양동열 (한국과학기술원 기계공학과)
  • Published : 2003.09.01

Abstract

The dimensional accuracy and global roughness between successive layers of VLM-s, which is a new rapid prototyping process using hotwire cutter and EPS foam, depend significantly on the operating parameters of hotwire cutter. In the present study, the effect of cutting angle on the kerf width and edge shape in hotwire cutting of EPS foam for the case of single-sloped cutting with one cutting angle was investigated. Through single-sloped cutting tests, the modified relationship between kerf width and effective heat input, considering the effect of the cutting angle, and the relationship between the melted area and the cutting angle were obtained. In order to investigate the effect of cutting angles on the thermal field in EPS foam, transient heat transfer analyses using single-sloped volumetric heat flux model and locally-conformed mesh were performed. Through the comparison between experimental and numerical results, it was shown that the proposed analysis model is needed to estimate the three-dimensional temperature distribution of the EPS foam for the case of single-sloped hotwire cutting.

Keywords

References

  1. Proceedings of Solid Free Form Fabrication Symposium Techniques for Imporved Speed Accuracy in Layered Manufacturing A.Nova;S.Kaza;Z.Wang;C.Thomas
  2. Journal of Engineering Manufacture v.216 no.9 Investigation into Development of Progressive-Type Variable Lamination Manufacturing using Expandable Polystyrence Foam and Its Apparatus Dong-Gyu Ahn;Sang-Ho Lee;Dong-Yol Yang https://doi.org/10.1243/095440502760291790
  3. International Journal of Machine Tools & Manufacture v.42 no.11 Development of Transfer-Type Variable Lamination Manufacturing (VLM-s) Process Dong-Gyu Ahn;Sang-Ho Lee;Dong-Yol Yang https://doi.org/10.1016/S0890-6955(02)00054-8
  4. International Journal of Machine Tools & Manufacture v.42 no.5 Investigation into Thermal Characteristics of Linear Hotwire Cutting System for Variable Lamination Manufacturing (VLM) Process by using Expandable Polystyrene Foam Dong-Gyu Ahn;Sang-Ho Lee;Dong-Yol Yang https://doi.org/10.1016/S0890-6955(01)00144-4
  5. Welding Journal Penetration Welding with Lasers D.T.Swift-Hook;A.E.F.Gick
  6. Surface and Coating Technology v.38 A Study on Residual Stresses in Laser Surface Hardening of a Medium Carbon Steel Y.S.Yang;S.J.Na https://doi.org/10.1016/0257-8972(89)90093-5
  7. Materials & Design v.17 no.3 Experimental Design and Analysis of In-Plane Processig Accuracy for SSM Process W.Wang;W.Feng;Y.Yan;J.Y.H.Fuh https://doi.org/10.1016/S0261-3069(96)00050-7
  8. Journal of Engineering Manufacture v.214 no.5 Three-Dimensional Finite Element Modeling of Laser Surface Modification M.Labudovic;D.Hu;R.Kovacevice https://doi.org/10.1243/0954405001518062
  9. SYSWELD+2.0 Reference Manual ESI Group
  10. Introduction to Heat Transfer (2nd Edition) F.P.Incropera;D.P.Dewitt
  11. Thermophysical Properties of Material Y.S.Toulokian;C.Y.Ho
  12. Introduction to Heat Transfer (2nd Edition) F.P.Incropera;D.P.Dewitt