참고문헌
- Lim, K. Y., Yu, K. H., Cheong, C. Y. and Seo, N. S., 'A Study on the Machinability of SUS 304,' J. of the KSPE, Vol. 10, No.1, pp. 34-41, 1993
- Yu, K. H., Cheong, C. Y. and Seo, N. S., 'A Study on the Cutting Characteristics of SUS 304 by Flank Wear,' J. of the KSPE, Vol. 11, No.2, pp. 182-188, 1994
- Kwon, Y. K., Oh, S. H. and Kim, D. H., 'Characteristics of Tool Wear and Cutting Temperature in Machining of SUS 304,' J. KSPE, Vol. 11, No. 1, pp. 71-79, 1994.
- Takeyama, H., 'Performance of Carbide Tools in Machining 18-8 Stainless Steel,' Trans. ASME, Ser. B, Vol. 83, pp. 572-578, November 1961
- Takeyama, H., Iijima, N. and Yamamoto, Y., 'Effect of Surface Treatment of Cutting Tool upon Its Brittle fracture due to metal Adhesion - Study on Surface Characterization of Cutting Tool Material and Prevention of Its Brittle Fracture (Part I),' J. JSPE, Vol. 52, No.2, pp. 79-84, 1986
- Nakayama, K., 'The Metal Cutting in Its Principle,' Korona, pp. 163-166, 1978
- Ono, T. and Takeyama, H., 'Basic Investigation on Grooving Wear,' J. JSPE, Vol. 41, No.3, pp. 85-91, 1975
- Gieszen, C. A., 'The Effect of gases on Finish Turning - Groove Formation Influence by Gaseous Environment,' Annals CIRP, Vol. 18, pp. 563-570, 1970
- Luk, W. K. and Scrutton, R. F., 'The Origin of Groove Wear in the Turning Operation,' Inst. J. Prod. Res., Vol. 6, No.3, pp. 197-204, 1968
- Show, M. C., Thurman, A. L. and Ahlgren, H. J., 'A Plasticity Problem Involving Plane Strain and Plane Stress Simultaneously - Groove Formation in the Machine of High Temperature Alloys,' Trans. ASME, Ser. B, Vol. 88, pp. 142-151, 1966 https://doi.org/10.1115/1.3670904
- Nakayama, K., 'Cutting Tool without Corner Roundness,' J. JSPE, Vol. 40, No.5, pp. 409-416, 1974
- Nakayama, K., 'On the Formation of Saw-Toothed Chip in Metal Cutting,' J. JSPE, Vol. 43, No. 1, pp. 117-122, 1977
- Katsura, H., 'Ceramic Tool,' J. JSPE, Vol. 61, No.6, pp. 764-772, 1995