Spray Dry한 $\beta$-SiC-Ti $B_2$ 도전성 세라믹 복합체의 특성에 미치는 Annealing 온도

Effect of Annealing Temperature on the Properties of $\beta$ -SiC-Ti $B_2$ Electrocondutive Ceramic Composites by Spray Dry

  • 신용덕 (원광대 전지전자 및 정보공학부) ;
  • 주진영 (원광대 전기공학과) ;
  • 최광수 (원광대 전기공학과) ;
  • 오상수 (원광대 전기공학과) ;
  • 서재호 (원광대 전지전자 및 정보공학부)
  • 발행 : 2003.08.01

초록

The composites were fabricated respectively 61vo1.% $\beta$ -SiC and 39vo1.% Ti $B_2$ spray-dried powders with the liquid forming additives of l2wt% $Al_2$ $O_3$$Y_2$ $O_3$ by pressureless annealing at 1$700^{\circ}C$, 175$0^{\circ}C$, 180$0^{\circ}C$ for 4 hours. The result of phase analysis of composites by XRD revealed $\alpha$ -SiC(6H), Ti $B_2$, and YAG(A $l_{5}$ $Y_3$ $O_{12}$ ) crystal phase. The relative density, the Young's modulus and fracture toughness showed respectively the highest value of 92.97%, 92.88Gpa and 4.4Mpaㆍ $m^{\frac{1}{2}}$ for composites by pressureless annealing temperature 1$700^{\circ}C$ at room temperature. The electrical resistivity showed the lowest value of 8.09${\times}$10$^{-3}$ ㆍcm for composite by pressureless annealing temperature 1$700^{\circ}C$ at $25^{\circ}C$. The electrical resistivity of the SiC-Ti $B_2$ composites was all positive temperature cofficient resistance(PTCR) in the temperature ranges from $25^{\circ}C$ to $700^{\circ}C$.

키워드

참고문헌

  1. S. Prochazka and R. M. Scanlan, 'Effect of Boron and Carbon on Sintering SiC' J. Am Ceram. Soc, Vol. 58, NO. 1-2, pp. 72, 1975 https://doi.org/10.1111/j.1151-2916.1975.tb18990.x
  2. F. F. Lange and T. K. gupta, 'Sintering of SiC with Boron Compounds' J. Am Ceram Soc,-Discussions and Notes, Vol. 59, NO. 11-12, 537-538, 1976 https://doi.org/10.1111/j.1151-2916.1976.tb09435.x
  3. Yukio Takeda, Kousuke Nakamura, Kunihiro Maeda and Yasuo Matsushita, 'Effects of Elemental Additives on Electrical Resistivity of Silicon Carbide Ceramics' J. Am Ceram. Soc., 70[10], c-266-c-267, 1987 https://doi.org/10.1111/j.1151-2916.1987.tb04895.x
  4. Do-Hyeong Kim and Chong HeeKim, 'Toughening Behavior of Silicon Carbide with Additions of Yttria and Alumina' J. Am Ceram Soc, Vol. 735, pp.1431-34, 1990
  5. Suresh Baskaran and John W. Halloran, 'Fibrous Monolithic Ceramics-' n, Flexural Strength and Fracture Behavior of the Silicon Carbide / Graphite System' J. Am Ceram. Soc, Vol. 76 NO. 9, pp. 2217-2224, 1993 https://doi.org/10.1111/j.1151-2916.1993.tb07757.x
  6. Seung-Hyunk Yim, Yong-Deok Shin and Joon-Tae Song,'The Properties of ${\beta}-SiC-TiB_2$ Electroconductive Ceramic Composites Densified by Liquid-Phase Sintering' Trans. KIEE. Vol. 49 NO. 9, pp. 510-515, 2000
  7. Yong-Deok shin, Dong-Yoon Lee, 'Estimation of the Preperties for the $SiC-TiB_2$ Electrocondutive Ceramic Composites by YAG and Porosity' Trans. KIEE. Vol. 50 NO. 11, pp. 544-549, 2001
  8. A. G. Evans and T. R. Wilshaw, 'Quasi-Static Solid Particle Demage in Brittle Solids-1. Observation Analysis and Implication' Acta Metallurgica. Vol. 24, pp. 939-956, 1976 https://doi.org/10.1016/0001-6160(76)90042-0
  9. M. Ramulu and M. Taya, 'EDM machinability of SiCw/Al Composites' Journal of Materials Science. Vol. 24, pp. 1103-1108, 1989 https://doi.org/10.1007/BF01148805
  10. Tor Grande, Hakson Sommerset, Eirik Hagen, Kjell Loss on Liquid-Phase-Sintered Silicon Carbide', J. Am. Ceram. Soc., Vol. 80, NO. 4, pp 1047-1052, 1997 https://doi.org/10.1111/j.1151-2916.1997.tb02945.x
  11. William D. Callister, 'Materials Science and Engineering and Introduction' Fourth Edition, pp. 513, John Willy & Sons, Inc. 1996
  12. Patricia A. Hoffman, 'Thermo Elastic Properties of Silicon Cabide-Titanium Diboride Particulate Composite' M. S Thesis, Department of Materials Science and Engineering, The Pennsylvania State University, 1992
  13. Jurgen Rodel, 'Interaction Between Crack Deflection and Crack Bridging' Journal of the European Ceramic Society, 10, pp. 143-150, 1992 https://doi.org/10.1016/0955-2219(92)90027-B
  14. Journal of the European Ceramic Society v.10 Interaction Between Crack Deflection and Crack Bridging Jurgen Rodel https://doi.org/10.1016/0955-2219(92)90027-B