Abstract
The grout based on solution type makes it difficult to get the improvement of ground strength and the effefct of water curtain because it has lower strength and durability than suspension type. Nowadays, the technology of particle acceleration, that enhance the material permeability, such as grout based on solution type, and inexpensive grout, is being required. For these reasons, in this study, using wet milling system, we evaluated physical properties of manufactured factors such as water-cement ratio of particles before being milled, optimum milling capacity by controlling milling time and rpm, viscosity of materials, permeation coefficient, and unconfined compressive strength. Also, using micro wet milling apparatus which could manufacture ordinary Portland cement and high speed shear mix which could forcefully separate conglomerate particles in situ, we performed electrical resistivity investigation and falling head permeability tests to analyze differences of grouting effects. From these results, we found that the permeability of the applied equipment was much superior, and in the case of using high speed shear mixer, particles of grout material were well separated.
용액형 주입재의 경우 침투성은 우수하나, 현탁액형 주입재에 비하여 강도와 내구성이 현저하게 떨어지기 때문에 지반강도증대 및 차수효과를 얻기가 어렵다. 그러므로 현탁액형 그라우팅의 침투성 향상과 경제성을 고려하여 현장에서 초미립화된 주입재를 제조하는 분쇄기술의 실용화가 절실히 요구되고 있다. 따라서 본 연구에서는 현장에서 적용될 수 있는 습식분쇄기를 이용하여 피분쇄물의 물시멘트비와 분쇄장비의 분쇄시간과 분쇄속도를 조정하여 최적분쇄능력을 파악하고 피분쇄물의 점도, 침투성 및 일축압축강도 등과 같은 제조인자별 물리적 특성을 평가하였다. 또한, 보통포틀랜드시멘트를 현장에서 초미립화 할 수 있는 마이크로 습식분쇄기와, 뭉쳐진 입자를 강제로 분리할 수 있는 고속전단믹서를 현장에 적용하여 전기비저항탐사와 변수위투수시험으로 주입효과의 변화를 검토하였다. 그 결과 침투효과가 대단히 우수하였고 고속전단믹서를 사용한 경우 주입재의 입자분리가 뛰어남을 알 수 있었다.