Serial Communication-Based Fault Diagnosis of a BLDC Motor Using Bayes Classifier

  • Suh, Suhk-Hoon (Department of Electronics Engineering, Dankook University) ;
  • Woo, Kwang-Joon (Department of Electronics Engineering, Dankook University)
  • Published : 2003.09.01

Abstract

This paper presents a serial communication based fault diagnosis scheme for a brushless DC (BLDC) motor using parameter estimation and Bayes classifier. The presented scheme consists of a smart network board, and a fault detection and isolation (FDI) master. The smart network board is installed near the BLDC motor drive system to acquire motor data and transmit motor data to the FDI-master via serial communication channel. The FDI-master estimates BLDC motor resistance to detect symptom of faults, and assign symptom to fault type using Bayes classifier. In this scheme, since communication time delay has a serious effect on performance, periodic and fixed communication protocol is designed. Hence, the delay time is priory known. By experiment result, presented scheme was verified.

Keywords

References

  1. IEEE Trans. on Industrial Electronics v.47 no.5 Application of model-based fault detection to a brushless dcmotor O. Moseler;R. Isermann
  2. IEEE Spectrum Smart networks for control R. Raza
  3. Proc. UKACC Control 2000 Stabilization with control networks H. Ishii;B. A. Francis
  4. IEEE Trans. on Industrial Electronic v.47 no.5 Fault detection and diagnosis of permanent-magnet DC motor based on parameter estimation and neural network X. Qun;H.-Y Zhang;J. Liu;J. Yang
  5. IECON Model-based fault detection for a brushless DC motor using parameter estimation O. Moseler;R. Isermann
  6. Proc. of the American Control Conference Model-based fault diagnosis of an actuator system driven by the brushless DC motor O. Moseler;D. Juricic;A. Rakar;N. Muller
  7. Proc. of the 32nd ISR Observer based fault detection of PMSM using serial network S. H. Suh;K. J. Woo
  8. Journal of the Korean Institute of Illuminating and Electrical Installation Engineers v.16 no.5 Parameter-estimation fault detection of BLDC motor using serial communication S.-H. Sub;J.-B. You;K.-J. Woo
  9. System Identification Theory for the User L. Ljung
  10. Fault Diagnosis Using Parameter Estimation and Supervised Classification Techniques Ole Norretranders
  11. Pattern Classification R. O. Duda;P. E. Hart;D. G. Stork