DOI QR코드

DOI QR Code

수종의 엔진구동형 Nickel-Titanium file을 이용한 근관형성 방법이 근관만곡도 유지능력에 미치는 영향

EFFECT OF VARIOUS CANAL PREPARATION TECHNIQUES USING ROTARY NICKEL-TITANIUM FILES ON THE MAINTENANCE OF CANAL CURVATURE

  • 이철환 (단국대학교 치과대학 보존학교실) ;
  • 조경모 (강릉대학교 치과대학 보존학교실) ;
  • 홍찬의 (단국대학교 치과대학 보존학교실)
  • Lee, Cheol-Hwan (Dept. of Conservative Dentistry, College of Dentistry, Dankook University) ;
  • Cho, Kyung-Mo (Dept. of Conservative Dentistry, College of Dentistry, Kangnung University) ;
  • Hong, Chan-Ui (Dept. of Conservative Dentistry, College of Dentistry, Dankook University)
  • 발행 : 2003.01.01

초록

There are increasing usage of Nickel-Titanium rotary files in modern clinical endodontic treatment because it is effective and faster than hand filing due to reduced step. This study was conducted to evaluate the effect of canal preparations using 3 different rotary Nickel-Titanium files that has different cross sectional shape and taper on the maintenance of canal curvature. Simulated resin block were instrumented with Profile(Dentsply, USA), GT rotary files(Dentsply, USA), Hero 642(Micro-Mega France), and Pro-Taper(Dentsply, USA). The image of Pre-instrumentation and Post-instrumentation were acquired using digital camera and overspreaded in the computer. Then the total differences of canal diameter, deviation at the outer portion of curvature, deviation at the inner portion of curvature, movement of center of the canal and the centering ratio at the pre-determined level from the apex were measured. Results were statistically analyzed by means of ANOVA, followed by Scheffe test at a significance level of 0.05. The results were as follows; 1. Deviation at the outer portion of curvature, deviation at the inner portion of curvature were showed largest in Pro-Taper so also did in the total differences of canal diameter(p<0.05). 2. All the groups showed movements of center Profile combined with GT rotary files and Hero 642 has no difference but Pro-Taper showed the most deviation(p<0.05). 3. At the 1, 2, 3mm level from the apex movements of center directed toward the outer portion of curvature, but in 4, 5 mm level directed toward the inner portion of curvature(p<0.05). As a results of this study, it could be concluded that combined use of other Nickel-Titanium rotary files is strongly recommended when use Pro-Taper file because it could be remove too much canal structure and also made more deviation of canal curvature than others.

키워드

참고문헌

  1. Schilder H. Cleaning and shaping the root canal. Dent Glin North Am. 1974;18(2):269-96
  2. Wildey WL, Senia ES, Montgomery S. Another look at root canal instrumentation. Oral Surg Oral Med Oral Pathol.1992;74(4):499-507 https://doi.org/10.1016/0030-4220(92)90303-8
  3. Skidmore AE. Bjorndal AM. Root canal morphology of the human mandibular first molar. Oral Surg Oral Med Oral Pathol. 1971;32(5):778-84 https://doi.org/10.1016/0030-4220(71)90304-5
  4. Abou-Rass M. Frank AL, Glick DH. The anticurvature filing method to prepare the curved root canal. J Am Dent Assoc. 1980;101(5):792-4 https://doi.org/10.14219/jada.archive.1980.0427
  5. Civjan S, Huget EF, DeSimon LB. Potential applications of certain nickel-titanium (nitinol) alloys. J Dent Res. 1975 :54(1) :89-96 https://doi.org/10.1177/00220345750540014301
  6. Stoeckel D, Yu W. Superelastic Ni-Ti wire. Wire J Jnt. 1991:3:45-50
  7. Glosson CR, Haller RH, Dove SB, del Rio CE. A comparison of root canal preparations using Ni-Ti hand, Ni-Ti engine-driven, and K-Flex endodontic instruments. J Endo. 1995;21(3):146-51 https://doi.org/10.1016/S0099-2399(06)80441-3
  8. Serene TP, Adam JD, Saxena A. Nickel-titanium instruments : Applications in Endodontics. St Louis, Mosby. USA: Ishiyaku Euro America. Inc.,1-110
  9. Abou-Rass M, Frank AL, Glick DH. The anticurvature filing method to prepare the curved root canal. J Am Dent Assoc. 1980;101(5):792-4
  10. Thompson SA, Dummer PM. Shaping ability of Hero 642 rotary nickel-titanium instruments in simulatedroot canals: Part 2. Jnt Endo J. 2000;33(3):255-61
  11. Schafer E. Shaping ability of Hero 642 rotary nickeltitanium instruments and stainless steel hand KFlexofiles in simulated curved root canals. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2001; 92(2) :215-20 https://doi.org/10.1067/moe.2001.114622
  12. Thompson SA, Dummer PM. Shaping ability of Mity Roto 360 degrees and Naviflex rotary nickel-titanium instruments in simulated root canals. Part 1. J Endo. 1998:24(2):128-134 https://doi.org/10.1016/S0099-2399(98)80093-9
  13. Luiten DJ. Morgan LA, Baugartner JC, Marshall JG. A comparison of four instrumentation techniques on apical canal transportation. J Endo. 1995;21(1):26-32 https://doi.org/10.1016/S0099-2399(06)80553-4
  14. Gambill JM. Alder M, del Rio CE. Comparison of nickel-titanium and stainless steel hand-file instrumentation using computed tomography. J Endo. 1996: 22 (7):369-75 https://doi.org/10.1016/S0099-2399(96)80221-4
  15. Weine FS. 'Endodontic Therapy', 5th ed., St. Louis. Mosby. Inc. 1996:330-1
  16. Lim KC, Webber J. 'The validity of simulated root canals for the investigation of the prepared root canal shape', Int Endo J. 1985:18:240-6 https://doi.org/10.1111/j.1365-2591.1985.tb00450.x
  17. Thompson SA, Dummer PM. Shaping ability of Hero 642 rotary nickel-titanium instruments in simulated root canals: Part 1. Int Endo J. 2000May;33(3):248-54 https://doi.org/10.1046/j.1365-2591.2000.00287.x
  18. Elliott LM, Curtis RV, Pitt Ford TR. Cutting pattern of nickel - titanium files using two preparation techniques. Endod Dent Traumatol. 1998:14(1):10-5 https://doi.org/10.1111/j.1600-9657.1998.tb00802.x
  19. Bryant ST, Thompson SA, al-Omari MA, Dummer PM. Shaping ability of ProFile rotary nickel-titanium instruments with ISO sized tips in simulated root canals: Part 2. Int Endo J. 1998;31(4):282-9 https://doi.org/10.1046/j.1365-2591.1998.00150.x
  20. Roane JB, Sabala CL, Duncanson MG Jr. The 'balanced force' concept for instrumentation of curved canals. J Endo. 1985:11(5):203-11 https://doi.org/10.1016/S0099-2399(85)80061-3

피인용 문헌

  1. A comparison of shaping ability of the three ProTaper® instrumentation techniques in simulated canals vol.30, pp.1, 2005, https://doi.org/10.5395/JKACD.2005.30.1.058
  2. Effect of anticurvature filing method on preparation of the curved root canal using ProFile vol.30, pp.4, 2005, https://doi.org/10.5395/JKACD.2005.30.4.327
  3. Step by step analysis of root canal instrumentation with ProTaper® vol.31, pp.1, 2006, https://doi.org/10.5395/JKACD.2006.31.1.050
  4. A study of insertion depth of buchanan plugger after shaping using NI-TI rotary files in simulated resin root canals vol.31, pp.2, 2006, https://doi.org/10.5395/JKACD.2006.31.2.125
  5. Comparison of shaping ability using various Nickel-Titanium rotary files and hybrid technique vol.32, pp.6, 2007, https://doi.org/10.5395/JKACD.2007.32.6.530
  6. Stress distribution of three NiTi rotary files under bending and torsional conditions using a mathematic analysis vol.42, pp.1, 2009, https://doi.org/10.1111/j.1365-2591.2008.01481.x