KSTLE International Journal

한국트라이볼로지학회 (Korean Tribology Society)
권호 표지

A Study on the Rotordynamic Stability of Turbo Pump Unit

  • Kwak, Hyun-Duck (Tribology Research Center, Korea Institute of Science und Technology) ;
  • Lee, Yong-Bok (Tribology Research Center, Korea Institute of Science und Technology) ;
  • Kim, Chang-Ho (Tribology Research Center, Korea Institute of Science und Technology) ;
  • Ha, Tae-Woong (Department of Mechanical Engineering, Kyungwon Univ.) ;
  • Yoo, Woo-Chul (Hyundai Mobis Co.)
  • 발행 : 2003.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A turbo pump unit provides high pressure oxygen and fuel in a space shuttle main engine (SSME). This paper focused on rotordynamics, investigating its characteristics based on a numerical simulation of turbo pump finite element model. Speeds up to 50,000 rpm are considered, as well as the special problems related to elastic-ring, seal hydrodynamic force, shroud force and clearance-excitation farce. The rotordynamic prediction shows that the elastic-ring which is inserted between the casing and the outer race of ball bearing allows far an acceptable separate margin of first critical speed. Additionally, the results show that the floating ring seal, which have a peculiar ring, adds substantial stiffness and damping to the system as well as exhibits superior performance in terms of rotordynamic stability of system compared to the plain seal.

키워드

참고문헌

  1. Braun M. J., Wheeler R. L. and Hendricks R. C., 'A Fully Coupled Variable Properties Therrnohydraulic Model for a Cryogenic Hydrostatic Journal Bearing', ASME Journal of Tribology, Vol. 109, pp. 405-416, 1987. https://doi.org/10.1115/1.3261459
  2. Yoshikawa H., Ota T., Higashino K., and Nakai S., 'Numerical Analysis on Dynamic Characteristics of Cryogenic Hydrostatic Journal Bearing', ASME Journal of Tribology. Vol. 121, pp. 879-885, 1999 https://doi.org/10.1115/1.2834150
  3. Fayolle P., and Childs D. W., 'Rotordynarnic Evaluation of a Roughened-Land Hybrid Bearing', ASME Journal of Tribology, Vol. 121, pp. 133-138, 1999 https://doi.org/10.1115/1.2833794
  4. Saville M., Gu A., and Capaldi R., 'Liquid Hydrogen Turbopump Foil Bearing', AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference, AIAA-91-2108-CP, Sacramento, CA, 1991.
  5. Childs D. W. and Kim C. H., 'Test Results For Round-HolePattern Damper Seals: Optimum Configurations and Dimensions for Maximum Net Damping', ASME Journal of Tribology, Vol. 108, pp. 605-611, 1986. https://doi.org/10.1115/1.3261277
  6. Kim C. H. and Childs D. W., 'Analysis for Rotordynamic Coefficients of Helically-Grooved Turbulent Annular Seals', ASME Journal of Tribology, Vol. 109, pp. 136-143, 1987 https://doi.org/10.1115/1.3261305
  7. Childs D. W., 'The Space Shuttle Main Engine High-Pressure Fuel Turbopump Rotordynamic Instability Problem', ASME Journal of Engineering for Power, Vol. 100, pp. 49-57, 1978
  8. Kalmykov G. P., 'Critical Speed of Shaft Stress Analysis of Pumps and Turbine (2D/3D)', Technical Report, CONTRACT No. HYSA-99-S001, 2000
  9. Black H. F. and Jenssen D. N., 'Dynamic Hybrid Properties of Annular Pressure Seals', Proceeding of Journal Mechanical Engineering, Vol. 184, pp. 92-100, 1970
  10. Black H. F. and Jenssen D. N., 'Effects of High-Pressure Ring Seals on Pump Rotor Vibrations', ASME paper No. 71WA/FF- 38, 1971
  11. Black H. F., Allaire P. E. and Barrett L. E., 'Inlet Flow Swirl in Short Turbulent Annular Seal Dynamics', 9th International Conference on Fluid Sealing, pp. 1-3, 1981
  12. Kim C. H., 'Analysis and Testing for Rotordynamic Coefficients of Grooved Turbulent Annular Seals', Ph. D. Thesis, Dept. of Mechanical Engineering, Texas A&M University, 1985
  13. Ha T. W., Lee Y. B. and Kim C. H., 'Leakage and rotordynamic analysis of a high pressure floating ring seal in the turbo pump unit of a liquid rocket engine', Tribology International, accepted to be published, 2001.
  14. Nelson C. and Nguyen D., 'Analysis of eccentric annular incompressible seals: Part I-a new solution using Fast Fourier Transforms for determining hydrodynamic forces', Transactions of the ASME, Vol. 52, pp. 1-6, 1987
  15. Ha T. W. and Lee A. S., 'A Modeling of Pump Impeller Shroud and Wear-Ring Seal as a Whole, and Its Application to the Pump Rotordynamics', KSME International Journal, Vol. 12(3), pp. 441-450, 1998 https://doi.org/10.1007/BF02946359
  16. Thomas H., 'Instabile Eigenschwingungen von Turbinelaufern angefacht durch die Spaltstromungen Stopfbuschen und Beschauflungen', Bull de L?AIM, Vol. 71, pp. 317-328, 1958
  17. Alford J., 'Protecting Turbomachinery from Self-Excited Rotor Whir', ASME Journal of Engineering for Power, pp. 333-344, 1965
  18. Bolleter U., Leibundhut E., Sturchler R. and McCloskey T., 'Hydraulic Interaction and Exciatation Forces of High Head Pump Impellers', Proceedings of the Third Joint ASCE/ASME Mechanics Conference, La Jolla, CA. pp. 197-194, 1989