Journal of Mechanical Science and Technology

  • 제17권7호
  • /
  • Pages.1026-1035
  • /
  • 2003
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Modeling of the Centerless Infeed (Plunge) Grinding Process

  • Kim, Kang (School of Mechanical and Automotive Engineering, Kookmin University)
  • 발행 : 2003.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A computer simulation method for investigating the form generation mechanism in the centerless infeed (plunge) grinding process is described. For a 3-D simulation model of form generation, contact points are assumed to be on least squares contact lines at the grinding wheel, regulating wheel, and work-rest blade. Using force and deflection analyses, the validity of this assumption is shown. Based on the 2-D simulation model developed in the previous work and the least squares contact line assumption, a 3-D model is presented. To validate this model, simulation results were compared with the experimental works. The experiments and computer simulations were carried out using three types of cylindrical workpiece shapes with varying flat length. The experimental results agree well with the simulation. It can be seen that the effect of flat end propagated to the opposite end through workpiece reorientation.

키워드

참고문헌

  1. ASM International, 1989, Metals Handbook, 9th Edition, Vol. 16 Machinning, pp. 422, 448
  2. Dall, A.H., 1946, 'Rounding Effect in Centerless Grinding,' Mechanical Engineering, Vol. 68, No. 4, ASME, pp. 325-329
  3. Johnson, K.L., 1987, Contact Mechanics, Cambridge University Press, pp. 84-134
  4. Kim, K., Chu, C.N. and Barash, M.M., 1992a, 'Roundness Generation during Centerless Infeed Grinding,' Transactions of NAMRI of SME, 20, pp. 167-172
  5. Kim, K., Chu, C.N. and Barash, M.M., 1992b, Cylindricity Control in Precision Centerless Grinding, Technical Report TR-ERC 92-6, Purdue University, pp. 23-31, 77-86
  6. Kingery, W.D., Bowen, H.K. and Uhlmann, D.R., 1976, Introduction to Ceramic 2nd ed., John Wiley & Sons, pp. 768-783
  7. Malkin, S., 1989, Grinding Technology, Ellis Horwood Limited, pp. 116
  8. Reshetov, D.N. and Portman, V.T., 1988, Accuracy of Machine Tools, ASME Press, p. 275
  9. Rowe, W.B. and Barash, M.M., 1964, 'Computer Method for Investigating the Inherent Accuracy of Centerless Grinding,' Int. J. Mach. Tool Des. Res., Vol. 4, pp. 91-116 https://doi.org/10.1016/0020-7357(64)90002-2
  10. Rowe, W.B., Barash, M.M., Koenigsberger, F., 1965, 'Some Roundness Characteristics of Centerless Grinding,' Int. J. Mach. Tool Des. Res., Vol. 5, pp. 203-215 https://doi.org/10.1016/0020-7357(65)90011-9
  11. Snoeys, R., and Wang, I.C., 1968, 'Analysis of Static and Dynamic Stiffnesses of the Grinding Wheel Surface,' Proc. 9th Int'l Mach. Tool. Des. and Res. Conf. Part 2, pp. 1133-1148
  12. Yonetsu, S., 1959, 'Forming Mechanism of Cylindrical Work in Centerless Grinding,' Proc. Fujihara Memorial Faculty of Engineering, Keio Univ., Vol. 12, No. 47, pp. 27-45