Abstract
The soil nailing is one of the useful support-system in urban excavation because of the presence of other structures in the vicinity Since the soil nailing system was introduced, model experiments and theoretical studies have been performed to investigate behavior of soil nailed wall. However, there are few data in the case of multi-layered soil strata just like Seoul Metropolitan area in Korea. The feed back analyses are carried out using the measured wall displacement data for soil nailing construction sites with multi-layered strata in order to analyze the distance and the coefficients of extension zone of ground behind soil nailed wall. As a result, the distance of extension zone increased with increasing of the final excavation depth and the ratio of the distance to the final excavation depth was shown to be about 94% of the final excavation depth. Also, the coefficients of extension zone increased with enlargement of soil layer thickness and converged into constant value of 1.05. On the other hand, the maximum vertical displacements by the feed back analysis and Caspe's method were shown to be approximately 80%, 150~280% of the maximum horizontal displacement respectively.
쏘일네일링 공법은 작업공간의 확보가 용이하고 네일길이가 어스앵커보다 비교적 짧아 도심지 지하굴착에 매우 이로운 장점이 있다. 이 공법이 도입된 이후 쏘일네일링 벽체의 거동에 관한 연구는 토조에 의한 모형실험과 이론적 연구가 진행되고 있지만 지반조건이 다층토로 구성된 현장에 대한 연구는 미흡한 실정이다. 본 연구는 국내 다층토 지반에 시공된 쏘일네일링 현장에서 시공중 측정된 수평변위를 토대로 한 역해석적 방법에 의해 배면지반의 이완영역거리와 이완영역계수를 고찰하였다. 연구결과에 의하면 쏘일네일링 벽체 배면지반의 이완 영역거리는 최종굴착깊이의 증가에 따라 증가함을 보였으며, 그 비율은 최종굴착깊이의 94% 정도로 나타났다. 토사층과 암층이 혼합되어 있는 다층토 지반에서 토사층의 비율이 클수록 이완영역계수도 증가하였으나, 약 1.05값에서 수렴하는 경향을 나타냈다. 벽체 최대수평변위에 대한 지표면 최대수직변위와의 관계는 역해석결과에서 지표면 최대수직변위가 최대수평변위의 80%이하로 나타났으며, Caspe방법에 의한 지표면 최대수직변위는 최대수평변위의 150~280%의 범위로 나타나 역해석결과보다는 매우 큰 값을 나타내 Caspe방법이 매우 보수적임을 확인하였다.