DOI QR코드

DOI QR Code

The Forming Limit of Flange in the Radial Extrusion

레이디얼 압출에서 플랜지의 성형한계

  • 고병두 (인하대학교 자동화공학과) ;
  • 장동환 (인하대학교 자동화공학과) ;
  • 최호준 (인하대학교 자동화공학과) ;
  • 임중연 (동국대학교 기계공학과) ;
  • 황병복 (인하대학교 기계공학부)
  • Published : 2003.06.01

Abstract

In this paper, the workability of flange in the radial extrusion is analyzed in terms of the deformation pattern, the punch load and the forming limit by using simulation and experiment. A single action pressing is applied to both simulation and experiment. The analysis in this study is focused on the transient extrusion into the gap in radial direction with various gap heights and die corner radius. Based on the surface strains where surface cracking occurs, the forming patterns and strain-fracture relationships in producing radially extruded flange are obtained.

Keywords

References

  1. J. of Material Processing Tech. v.52 Review of Research into injection Forming of Tubular Materials M.Arentoft;S.B.Peterson;J.M.C.Rodrigues;P.A.F.Martins;R.Balendra;T.Wanheim https://doi.org/10.1016/0924-0136(94)01619-C
  2. J. of Material Processing Tech. v.96 An Experiment on Injection Upsetting Takaji Mizuno;Toshihiro Mizuno;K.Kitamura https://doi.org/10.1016/S0924-0136(99)00328-3
  3. J. of Material Processing Tech. v.77 Computer-Aided Evaluation of Workability in Bulk Forming A.S.Wifi;A.Abdel Hamid;N.El Abbasi https://doi.org/10.1016/S0924-0136(97)00430-5
  4. J. of Material Processing Tech. v.113 The influence of die geometry on the radial extrusion processes B.D.Ko;S.H.Lee;D.J.Kim;B.B.Hwang https://doi.org/10.1016/S0924-0136(01)00704-X
  5. J. of Material Processing Tech. v.113 The forming characteristics of radial-forward extrusion Y.S.Lee;S.K.Hwang.Y.S.Chang;B.B.Hwang https://doi.org/10.1016/S0924-0136(01)00705-1
  6. Trans. of Material Processing v.9 no.7 A Study on the Forming Characteristics of Radial Extrusion Combined with Backward Extrusion D.H.Jang;H.J.Choi;J.H.Choi;H.Y.Lee;B.B.Hwang
  7. J. of Material Processing Tech. v.113 The forming characteristics of radial-backward extrusion H.J.Choi;J.H.Choi;B.B.Hwang https://doi.org/10.1016/S0924-0136(01)00703-8
  8. The Sumitomo Search no.9 Material Fracture Methode in Cold Froging-Systematic Classification of Working Methods and Type of Cracking in Cold Forging T.Okamoto;T.Fukuda;H.Hagita
  9. J. of Machine Tools & Manufacture v.39 Application of Artificial Neural Network and Taguchi Method to Preform Design in Metal Forming Considering Workability D.C.Ko;D.H.Kim;B.M.Kim https://doi.org/10.1016/S0890-6955(98)00055-8
  10. ERC/NSM Report no.B8928 Development of equipment and capabilities for investigation of multy-action forming of complex parts J.A.Paul;R.Shivpuri;T.Altan
  11. J. of Material Processing Tech. v.53 A method for the evaluation of lubrication using injection upsetting T.Nishimura;T.Sato;Kyn Hoke;Y.Tada https://doi.org/10.1016/0924-0136(94)01760-X
  12. Int. J. of Mach.Tools Manufact. v.36 Towards net-shape of tubular components J.M.C.Rodrigues;S.B.Petersen;P.A.F.Martins;M.J.M.Barata Marques https://doi.org/10.1016/0890-6955(95)00020-8
  13. J. of Material Processing Tech. v.75 The influence of constitutive behaviour of materials on the formability in radial extrusion of tubular components M.Arentoft;H.Bjerregaard;C.B.Andersen;T.Wanheim https://doi.org/10.1016/S0924-0136(97)00301-4
  14. Technical report no.93 Radial extrusion of flanges on steel cylindrical workpiece W.Schatzle
  15. J. of Material Processing Tech. v.101 Ductile Fracture in Metal Working : Experimental and Theoretical Research B.P.P.A.Gouveia;J.M.C.Rodrigues;P.A.F.Martins https://doi.org/10.1016/S0924-0136(99)00449-5
  16. Forming Equipment, Materials, and Practices, Metal and Ceramics Information Center Air Force Material Laboratory
  17. 한국정밀공학회지 v.16 no.6 유한요소법을 이용한 예압된 금형의 응력해석 여홍태;최영;허관도
  18. 한국정밀공학회지 v.18 no.12 정밀 냉간단조 금형설계를 위한 보강링의 영향 여홍태;최영;허관도
  19. 한국정밀공학회지 v.17 no.10 이중 보강링으로 예압된 냉간압출 금형의 설계 허관도;여홍태;예상돈
  20. KS D 3753 합금 공구 강재(Alloy Tool Steels) (사)한국공업표준협회
  21. Proceeding of NAMRC. IX. ALPID-a general purpose FEM program for metal forming S.I.Oh;G.D.Lahoi;T.Altan
  22. J. of Material Processing Tech. v.69 The avoidance of defects in radially extruded tubular parts by preforming S.B.Petersen;R.Balendra;J.M.C.Rodrigues;P.A.F.Martins https://doi.org/10.1016/S0924-0136(97)00010-1
  23. A Study of Workability Criteria in Bulk Forming Process A.S.Wifi;N.El Abbasi;A.Abdel Hamid
  24. Proceeding of NAMRC. MI. Prediction and Elimination of Ductile Fracture in Cold Forging using FEM Simulation T.Altan;H.Kim;M.Yamanaka