References
- Lund, J. W., 1965, 'The Stability of an Elastic Rotor in Journal Bearings with Flexible, Damped Supports,' Journal of Applied Mechanics, pp. 911-920
- Choy, F. K., Braun, M. J. and Hu, Y., 1992, 'Nonlinear Transient and Frequency Response Analysis of a Hydrodynamic Journal Bearings,' ASME, Journal of Tribology, pp. 448-454
- Rho, B. H. and Kim, K. W., 2002, 'A Study on Nonlinear Frequency Response Analysis of Hydrodynamic Journal Bearings with External Disturbances,' STLE, Tribology Transactions, Vol. 45, No.1, pp. 117-121 https://doi.org/10.1080/10402000208982529
- Lee, J. B. and Kim, K. W., 1999, 'A Study on Stability Characteristics of Actively Controlled Externally Pressurized Air Journal Bearings,' JSME Int. Journal, Series C, Vol. 42, No.2, pp. 427-434 https://doi.org/10.1299/jsmec.42.427
- Rho, B. H. and Kim, K. W., 2002, 'A Study on the Dynamic Characteristics of Synchronously Controlled Hydrodynamic Journal Bearings,' Tribology International, Vol. 35, No.5, pp. 339-345 https://doi.org/10.1016/S0301-679X(02)00025-7
- Yoon, D. J., Kwon, O. Y., Jung, M. H. and Kim, K. W., 1995, 'Early Detection of Damages in Journal Bearings by AE Monitoring,' Journal of Acoustic Emission, Vol. 13, No.1, pp. 1-10
- Miettinen, J. and Anderson, P., 2000, 'Acoustic Emission of Rolling Bearings Lubricated with Contaminated Grease,' Tribology International, Vol. 33, No. 11, pp. 777-787 https://doi.org/10.1016/S0301-679X(00)00124-9
- Rho, B. H. and Kim, K. W., 2003, 'Acoustical Properties of Hydrodynamic Journal Bearings,' Tribology International, Vol. 36, No.1, pp. 61-66 https://doi.org/10.1016/S0301-679X(02)00132-9
- Rho, B. H., Kim, D. G. and Kim, K. W., 'Noise Analysis of Oil-Lubricated Journal Bearings,' IMechE, Part C, Journal of Mechanical Engineering Science, Vol. 217, No.3, pp. 365-371 https://doi.org/10.1243/095440603762870027
- Shires, G. L. and Dee, C. W., 1967, 'Pressurized Fluid Bearings with Inlet Slots,' Proceedings of Gas Bearing Symposium, Univ. Southampton, Paper No.7
- Dee, C. W. and Shires, G. L., 1971, 'The Current State of the Art of Fluid Bearings with Discrete Slot Inlets,' ASME, Journal of Lubrication Technology, Vol 93, No.4, pp. 441-450 https://doi.org/10.1115/1.3451615
- Rowe, W. B. and Stout, K. J., 1973, 'Design of Externally Pressurized Gas-Fed Journal Bearings Employing Slot Restrictors,' Tribology International, Vol. 6, No.4, pp. 140-147 https://doi.org/10.1016/0301-679X(73)90062-5
- Yoshimoto, S. and Nakano, Y., 1984, 'Stability of a Rigid Rotor Supported by Externally Pressurized Gas Journal Bearings with a Circular Slot Restrictor,' JSME Bulletin, Vol. 27, No. 225, pp. 561-568 https://doi.org/10.1299/jsme1958.27.561
- Yoshimoto, S., Nakano, Y. and Kakubari, T., 1984, 'Dynamic Properties of Externally-Pressurized Gas Journal Bearings with Circular Slot Restrictors,' JSME Bulletin, Vol. 27, No. 229, pp. 1537-1543 https://doi.org/10.1299/jsme1958.27.1537
- Beranek, L. L. and Ver, I. L., 1992, 'Noise and Vibration Control Engineering,' John Wiley & Sons