DOI QR코드

DOI QR Code

Elastohydrodynamic Lubrication Analysis on the Contacting Surfaces between Spur Gear Teeth

스퍼 기어 치면 사이의 탄성유체 윤활해석

  • Published : 2003.04.01

Abstract

An elastohydrodynamic lubrication analysis was performed on the contacting teeth surfaces of involute spur gears. Kinematics of the gear and the pinion were taken into account to get accurate geometric clearances around the elastohydrodynamic lubrication region of the contacting teeth. Pressure and film thickness distribution for the whole contacting faces in lubricated condition at several time steps were obtained through the analysis. Besides the pressure spike at the outlet region, a representative phenomenon in elastohydrodynamic lubrication regime, the pressure at the inlet region was slightly higher than that of the center region. The film thickness of transient condition was thicker than that of steady condition.

Keywords

References

  1. American Gear Manufacturers Association AGMA Standard
  2. Gear Handbook Dudley,D.W.
  3. Wear v.231 Modeling of reaction film failure in gear lubrication Jiang,Q.Y.;Barber,G.C. https://doi.org/10.1016/S0043-1648(99)00114-3
  4. Surface and Coatings Technology v.120 no.121 Performance of a rotating gear pair coated with an amorphous carbon film under a loss-of-luberication condition Murakawa,M.;Komori,T.;Takeuchi,S.;Miyoshi,K.
  5. J. of Tribology v.115 Sliding Wear Calculation in Spur Gears Wu,S.;Cheng,H.S. https://doi.org/10.1115/1.2921665
  6. Wear v.190 Elastohydrodynamic and micro-elasto-hydrodynamic lubrication Dowson,D. https://doi.org/10.1016/0043-1648(95)06660-8
  7. Wear v.207 Transient non-Newtonian elastohydrodynamic lubrication analysis of an involute spur gear Larsson,R. https://doi.org/10.1016/S0043-1648(96)07484-4
  8. Elastohydrodynamic lubrication, the Fundamentals of Roller and Gear Lubrication Dowson,D.;Higginson,G.R.
  9. Fundamentals of Fluid Film Lubrication Hamrock,B.J.
  10. Technische Hogeschool te Delt Correlational Aspects of the Viscosity-Temperature-Pressure Relationship of Lubricating Oils, Doctoral thesis Roelands,C.J.A
  11. JSME International J. v.45 no.C 3-Dimemsional Elastohydrodynamic Lubrication Analysis on the Cam-Roller Contact with Consideration of Roller Profiling Koo,Y.P.;Cho,Y.J;Lee,D.W. https://doi.org/10.1299/jsmec.45.316