Abstract
Anisotropic shear strength of rock joints is studied based on the artificially fractured specimens using experimental and analytical methods. Series of direct shear tests are performed to obtain the strength, stiffness and friction angle of joints under various low normal stresses and shearing directions. The results of shear strength and stiffness show anisotropic value according to shearing direction under low normal stress specially less than 2.45 MPa. But, the effect of joint roughness on strength decreases with increasing normal stress. To estimate more effectively the peak shear strength under low normal stress, the modified Barton's equation is suggested.
암석의 절리면 전단강도의 이방성을 연구하기 위하여 인공절리면을 형성한 시편에 대한 실험을 실시하고 그 결과를 분석하였다. 즉 낮은 수직응력 상태에서 전단 방향에 따른 전단강도, 전단강성 및 마찰각을 구하기 위한 실험을 실시하였다 그 결과 낮은 수직응력하에서 전단 강도 및 강성은 전단 방향에 따라 이방성을 보이며, 특히 수직응력 2.45 MPa미만에서 뚜렷하였다. 그리고 수직응력이 증가할수록 절리면의 이방성 효과는 감소하였다. 따라서 낮은 수직응력 하에서 전단강도 및 강성값을 보다 정확히 구하기 위해서 Barton의 식에 전단방향을 고려한 보정함수 F(a)를 반영하여 새로이 수정식을 제안한다.