카본 및 실리카 강화 복합재료의 고온 인장 특성 평가

The Tensile Characteristics of Carbon and Silica Reinforced Composites Under Elevated Temperature

  • 발행 : 2003.06.01

초록

본 연구에서는 항공기 구조재로 활용되고 있는 카본/에폭시 복합재료와 기체 외부 열차단용 소재로 추천되고 있는 실리카/페놀 및 카본/페놀 복합재료 2종에 대하여 고온 환경하에서 인장시험을 행하였다. 고온용 스트레인게이지를 응용하여 각각의 복합재료에 대한 온도변화에 따른 인장강도, 탄성계수, 프와송비 같은 기계적 물성치를 도출하였으며, 복합재료 방향성에 따른 기계적 물성 및 인장 거동을 강화재 종류별로 비교 고찰하였다. 본 연구결과를 통하여 획득된 기초자료들은 항공기 구조재 및 열차단용 내열재료를 이용한 복합 구조재의 설계 및 해석에 응용되었다.

This paper presents the tensile characteristics for carbon/epoxy, carbon/phenolic and silica/phenolic composites under elevated temperature, which are considered for vehicle structure or thermal protection materials. The tensile test was conducted with servo-hydraulic testing machine and high temperature furnace, and the mechanical properties such as tensile strength, elastic modulus and Poisson's ratio were evaluated by using high temperature strain gages. Also, they were compared each other with respect to fiber orientation and temperature effect. These test results were used for designing and analyzing some airframe structures with these composites.

키워드

참고문헌

  1. Naval Postgraduate School Master's Thesis Effects of Temperature on the Tensile Strength and Elastic Modulus of Composite Material Hae Ryong Bae
  2. Naval Postgraduate School Master's Thesis Composite Materials at High Temperature Charles R.Bess
  3. J. Composite Materials v.10 High Temperature Tensile Strength of Graphite/Epoxy Laminates Containing Circular Holes J.M.Whivey;R.Y.Kim https://doi.org/10.1177/002199837601000405
  4. ASTM STP 768 Elastic Properies and Fracture Behavior of Graphite/ Polyimide Composites at Extreme Temperature D.P.Garber;D.H.Morris;R.A.Everette,Jr.
  5. ISO 3268(1st ed.) Plastics-Glass-reinforced materials Determination of tensile properties
  6. ASTM D 3039 Standard Test Method for Tensile Properties of Fiber-Resin Composites
  7. Measurement Group TECH NOTE-504-1 Strain Gage Installations with M-Bond 43-B, 600 and 610 Adhesive System
  8. Measurement Group TECH NOTE-504-1 Strain Gage Thermal Output and Gage Factor Variation with Temperature
  9. Measurement Group, Instruction Bulletin B-130-14 Measurement of Thermal Expansion Coefficient Using Strain Gage
  10. Strain A temperature calibration of a temperature/strain transducer based on two strain gauges P.Cappa;K.McConnel;L.Zachary
  11. Experimental Characterization of Advanced Composite Materials Lief A. Carlsson;R. Byron Pipes
  12. ASTM E111-82 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus