References
- Filipovic, J., Viskanta, R., Incropera, F. P. and Veslocki, T. A., 1994, 'Cooling of a Moving Steel Strip by an Array of Round Jets,' Steel Research, Vol. 65, No. 12, pp. 541-547 https://doi.org/10.1002/srin.199401210
- Hatta, N., Kokado, J., Takuda, H., Harada, J. and Hiraku, K., 1984, 'Predictable Modelling for Cooling Process of a Hot Steel Plate by a Laminar Water Bar,' Arch. Eisenhuttenwes, Vol. 55, No.4, pp. 143-148
- Ishigai, S., Nakanishi, S. and Ochi, T., 1978, 'Boiling Heat Transfer for a Plane Water Jet Impinging on a Hot Surface,' Int. Heat Transfer Conf., 6th, pp.445-450
- Katsuta, M. and Kurose, T., 1981, 'A Study on the Boiling Heat Transfer of Thin Liquid Film (Part 2, Nucleate Boiling Heat Flux,' JSME, Vol. 47, No. 421, pp. 1849-1860 https://doi.org/10.1299/kikaib.47.1849
- Kim, S. J., 1990, Characteristics of ThermoPhysical Properties of Various Kinds of Steel at Elevated Temperature, Research Report, Research Institute of Industrial Science and Technology
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single-Sample Experiments,' Mechanical Engineering, Vol. 75,pp. 3-8
- Kokado, J., Hatta, N., Takuda, H., Harada, J. and Yasuhira, N., 1984, 'An Analysis of Film Boiling Phenomena of Subcooled Water Spreading Radially on a Hot Steel Plate,' Arch. Eisenhuttenwes, Vol. 55, No.3, pp. 113-118
- Lee, K. W. and Kim, Y., 1988, 'A study on the Boiling Heat Flux on High Temperature Surface by Impinging Water Jet,' KSME, Vol. 12, No.1, pp.81-94
- Oh, S. M. and Lee, S. J., 1992, 'Cooling Chacterisrics of a Hot Steel Plate by a Circular Impinging Liquid Jet,' KSME, Vol. 16, No.6, pp. 1150-1155
- Roberts, W. L., 1983, Hot Rolling of Steel, Marcel Dekker, New York
- Ruch, M. A. and Holman, J. P., 1975, 'Boiling Heat Transfer to a Freon-113 Jet Impinging Upward onto a Flat Heated Surface,' Int. J. Heat Mass Transfer, Vol. 18, pp. 51-60 https://doi.org/10.1016/0017-9310(75)90007-1
- Stoecker, W. F. and Jones, J. W., 1982, Refrigeration and Air Conditioning, McGraw-Hill, New York
- Tacke, G., Litzke, H. and Raquet, E., 1985, 'Investigations into the Efficiency of Cooling Systems for Wide-Strip Hot Rolling Mills and Computer-Aided Control of Strip Cooling, in Accelerated Cooling of Steel,' P. D. Southwick, Ed., The Metallurgical Socity, Warrendale Pa., pp.35-54
- Trujillo, D. M., INTEMP user's manual, TRUCOMP CO., CA
- Vader, D. T., Incropera, F. P. and Viskanta, R., 1992, 'Convective Nucleate Boiling on a Heated Surface Cooled by an Impinging, Planar Jet of Water,' J. Heat Transfer, Vol. 114, pp. 152-160 https://doi.org/10.1115/1.2911241