참고문헌
- Aigner, M. and Wittig, S., 1987, 'Swirl and Counter Swirl Effects in Pre filming Airblast Atomizers,' ASME Paper 87-GT-204
- Amsden, A. A., O'rourke, P. J. and Butler, T. D., 1989, 'KIVA-II - A Computer Program for Chemically Reactive Flows with Sprays,' Los Alamos National Labs., LA -11560- MS
- Bai, C. and Gosman, A. D., 1996, 'Mathmatical Modeling of Wall Films Formed by Impinging Sprays,' SAE Paper 960626
- Bower, G. R., Chang, S. K., Corradini, M. L., El-Beshbeeshy, M., Martin, J. K. and Krueger, J., 1988, 'Physical Mechanisms for Atomization of a Jet Spray: A Comparison of Models and Experiments,' SAE Trans., Vol. 97, SAE Paper No. 881318
- Chang, S. K., Koo, J. Y. and Chung, H. C., 1995, 'Transient Liquid Jet Breakup Model and Comparison with Phase Doppler Measurements,' KSME International Journal Vol. 9, No. 1, pp.41-50
- Cohen, J. M. and Rosfjord, T. J., 1993, 'Influences on the Sprays Formed by High-Shear Fuel Nozzle/Swirler Assemblies,' Journal of Propulsion and Power, Vol. 9, No. 1, pp. 16-27 https://doi.org/10.2514/3.51351
- Dombrowski, N. and Johns, W. R., 1963, 'The Aerodynamic Instability and Disintegration of Viscous Liquid Sheets,' Chemical Engineering Science, Vol. 18, pp.203-214 https://doi.org/10.1016/0009-2509(63)85005-8
- Fan, L. and Reitz, R. D., 2000, 'Spray and Combustion Modeling in Gasoline Direct-Injection Engines,' Atomization and Sprays, Vol. 10, pp.219-249 https://doi.org/10.1615/AtomizSpr.v10.i3-5.30
- Foucart, H., Habchi, J. F., Le Coz, J. F. and Baritaud, 1988, 'Development of a Three Dimensional Model of Wall Fuel Liquid Film for Internal Combustion Engines,' SAE Paper 980133
- Hiroyasu, H. and Arai, M., 1990, 'Structures of Fuel Sprays in Diesel Engines,' SAE paper 900475
- Hwang, S. S. and Koo, J. Y., 1997, 'Modeling the Atomization of Fuel Droplets in High Speed Air Stream,' Proceedings of the 30th International Symposium on automotive & Automation, pp. 279 - 284
- Ibrahim, E. A. and Przekwas, A. J., 1991, 'Impinging Jets Atomization,' Phys. Fluids A 3 (12), pp.2981-2987 https://doi.org/10.1063/1.857840
- Lin, S. P. and Reitz, R. D., 1988, 'Drop and Spray Formation from a Liquid Jet,' Annu. Rev. Fluid Mech. Vol. 30, pp. 85-105 https://doi.org/10.1146/annurev.fluid.30.1.85
- Mansour, A., Benjamine, M. A. and Steinthorsson, E., 2000, 'A New Hybrid Air Blast Nozzle for Advanced Gas Turbine Combustor,' ASME Paper 2000-GT-117
- Matsumoto, S. and Saito, S., 1970, 'On the Mechanism of Suspension of Particles in Horizontal Conveying: Monte Carlo Simulation Based on the Irregular Bouncing Model,' (Japanese) J. Chem. Engr., Vol. 3, pp. 83-92 https://doi.org/10.1252/jcej.3.83
- Muller, D. E., 1956, 'A Method for Solving Algebraic Equations Using an Automatic Computer,' Mathematics of Computation, Vol. 10, pp.208-215 https://doi.org/10.2307/2001916
- Naber, J. D. and Reitz, R. D., 1988, 'Modeling Engine Spray/Wall Impingement,' SAE Paper 880107
- O'Rourke P. J. and Amsden, A. A., 1987, 'The Tab Method for Numerical Calculation of Spray Droplet Breakup,' SAE Paper 872089
- Nicholls, J., 1972, 'Stream and Droplet Breakup by Shock Waves,' NASA SP-194, pp. 126128
- Pilch, M., 1981, 'Acceleration Induced Fragmentation of Liquid Drops,' University of Virginia, Ph. D. Thesis
- Pilch, M. and Erdman,C. A., 1987, 'Use of Breakup Time Data and Velocity History Data to Predict the Maximum Size of Stable Fragments for Acceleration-Induced Breakup of a Liquid Drop,' Int. J. Multiphase Flow, Vol. 13, No.6, pp.741-757 https://doi.org/10.1016/0301-9322(87)90063-2
- Ranger, A. A. and Nicholls, J. A., 1969, 'Aerodynamic Shattering of Liquid Drops,' AIAA Journal Vol. 7, No.2, pp. 285-289 https://doi.org/10.2514/3.5087
- Reitz, R. D. and Bracco, F. V., 1979, 'On the Dependence of Spray Angle and Other Spray Parameters on the Nozzle Design and operating Conditions,' SAE Paper 790494
- Reitz, R. D. and Diwakar, R., 1986, 'Effects of Drop Breakup on Fuel Sparys,' SAE paper 860469
- Reitz, R. D., 1987, 'Modeling Atomization Processes in High-Pressure Vaporizing Sprays,' Atomisation and Spray Technology, Vol. 3, pp. 309-337
- Reitz, R. D., 1994, 'Computer Modeling of Sprays,' Spray Technology Short Course Note, Pittsburgh, PA, May 17
- Rosskamp, H., Willmann, M., Meisl, J., Meier, R., Maier, G. and Wittig, S., 1998, 'Effect of the Shear Driven Liquid Wall Film on the Performance of Prefimming Airblast Atomizer,' ASME Paper 98-GT-500
- Senecal, P. K., Schmidt, D. P., Nouar, I., Rutland, C. J., Reitz, R. D. and Corradini, M. L., 1999, 'Modeling High- Speed Viscous Liquid Sheet Atomization,' International Journal of Multiphase Flows 25, pp. 1073-1097 https://doi.org/10.1016/S0301-9322(99)00057-9
- Simpkins, P. G. and Bales, E. L., 1972, 'WaterDrop Response to Sudden Accelerations,' J. Fluid Mech., Vol. 55, Part 4, pp. 629-639 https://doi.org/10.1017/S0022112072002058
- Stanton, D. W. and Rutland C. J., 1996, 'Modeling of Film Formation and Wall Interaction in Diesel Engines,' SAE Paper 960628
- Stanton, D. W. and Rutland C. J., 1998, 'MultiDimensional Modeling of Heat and Mass Transfer of Fuel Films Resulting from Impinging Sprays,' SAE Paper 980132
- Taylor, G. I., 1960, 'Formation of Thin Flat Sheets of Water,' Proceedings of Royal Society, London, Vol. 259A, pp. 1-17
- Taylor, G. I., 1963, 'The Instability of Liquid Surfaces When Accelerated in a Direction Perpendicular to Their Planes. 1,' The Scientific Papers of G. I. Taylor Vol. 3, pp. 532 - 536, edited by Batchelor, G. K., Cambridge University Press
- Taylor, G. I., 1966, 'Oblique Impact of a Jet on a Plane Surface,' Phil. Trans. Roy. Soc. (London) A, Vol. 260, pp. 96-100 https://doi.org/10.1098/rsta.1966.0034
- Wu, P. K., Kirkendall, K. A., Fuller, R. P. and Nejad, A. S., 1997, 'Breakup Processes of Liquid Jets in Subsonic Crossflows,' Journal of Propulsion and Power, Vol. 13, No.1, pp. 64-73 https://doi.org/10.2514/2.5151
- Zuo, B., Black, D. L. and Crocker, D. S., 2002, 'Fuel Atomization and Drop Breakup Models for Advanced Combustion CFD Codes,' AIAA Paper 2002-4175
- Xin, J., Ricart, L. and Reitz, R. D., 1998, 'Computer Modeling of Diesel Spray Atomization and Combustion,' Combust. Sci. and Tech., Vol. 137, pp.171-194 https://doi.org/10.1080/00102209808952050