DOI QR코드

DOI QR Code

회전 날개에 의한 덕트 소음 저감에 관한 실험적 고찰

An Experimental Investigation of Noise Reduction by Blades in a Duct

  • 발행 : 2003.05.01

초록

There have been lots of studies on noise transmission analysis and noise reduction In ducts. In order to reduce the noise transmission in ducts. active noise cancellation techniques have often been employed and a rotation shaft with blades has sometimes been suggested. These Ideas were not successfully commercialized because of the limitation of real life such as size or application difficulties. This study investigated how a rotational shaft with blades could reduce the noise transmission in a duct. To do so, an assembly of the shaft and the $haft housing was built In the middle of a duct. and the clearance between the blades and the housing was 0.2 mm. The noise reduction was experimentally evaluated with respect to the number of blades. the rotation speed, and the rotation or stop. This paper showed that the noise reduction resulted in about 14∼19 dBA regardless of the three test conditions only If the blades always blocked the duct. And. the noise reduction increased due to the higher number of blades and the lower speed of the shaft.

키워드

참고문헌

  1. 윤두병, 김양한, 정균양, 조대승. 1998. “덕트 내부의 고차모드 수보다 적은수의 제어 음원과 마이크로폰을 이용한 방사 소음 제어에 관한 연구," 한국소음진동공학회논문집, 제 8 권 제 2 호, pp. 283-288.
  2. 김준호, 김영찬, 유승국, 김두훈, 이종림, 전규식, 1997, “원자력 발전소용 덕트형 소음기 개발," 한국소음진동공학회 추계학술대회논문집, pp. 488-492.
  3. 오상헌, 김양한, 1993, “반사가 있는 관내에서의 능동소음제어,” 한국소음진동공학회 추계학술대회논문집, pp. 131-136.
  4. 이종식, 1992, “능동소음제어기법을 이용한 공조덕트 소음 제어,” 공기조화. 냉동공학회 제 21권, 제 1 호, pp. 35-39.
  5. 남현도, 장종대, 1992, “덕트 잡음 제거를 위한 다중 모델 적용 능동 소음 제어,” 한국조명. 전기설비학회 학술발표회논문집, pp. 56-59.
  6. 홍석봉, 1998, 내연기관의 배기량 자동조절 장치, 국내 특허 제1001454630000 호, 1998. 4. 30. 등록.
  7. 上田 保典, 1996, エンヅン排氣騷音低減裝置, 일본특허特許平1-2000042, 1996. 8. 6 공개.
  8. 長谷川, 1989, 內燃機關用騷音裝置, 일본특허平1-208507, 1989.8.22 공개.
  9. 홍경섭, 김양한, 곽윤근, 김광식, 1988, “평균 유동이 있는 단순확장관의 기하학적 형상이 음향학적 특성에 미치는 영향,” 대한기계학회논문집, 제 12 권, 제 4 호, pp. 662-669.