Korean Journal of Air-Conditioning and Refrigeration Engineering (설비공학논문집)

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Fluid Flow in the Fluidized Bed Shell and Tube Type Heat Exchanger with Corrugated Tubes

파형관 튜브가 있는 순환유동층 원통다관형 열교환기 내의 유체유동

  • 안수환 (경상대학교 기계항공공학부 해양산업연구소) ;
  • 이병창 (경상대학교 대학원) ;
  • 배성택 (경상대학교 대학원)
  • Published : 2003.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

An experimental study was carried on the characteristics of fluid flow and heat transfer in a fluidized bed shell-and-tube type heat exchanger with corrugated tubes. Seven different solid particles having same volume were circulated in the tubes. The effects of various parameters such as water flow rates, particle geometries and materials, and geometries of corrugated tubes on relative velocities and drag coefficients were investigated. The present work showed that the drag force coefficients of particles in the corrugated tubes were usually lower than those in the smooth tubes, meanwhile the relative velocities between particles and water in the corrugated tubes were little higher than those in the smooth tubes except the glass.

Keywords

References

  1. J. Coll. Interf. Sci. v.72 Fine particle deposition in smooth parallel-plate channels Bowen,B.D.;Epstein,N.
  2. Int. J. of Heat and Mass Transfer v.30 no.11 An investigation into heat transfer in circulatiing fluidized beds Basu,P.;Nag,P.K.
  3. J. Coll. Interf. Sci. v.132 Deposition of polystyrene latex particle toward polymethylmethacrylate in a parallel flow cell Sjollema,J.;Busscher,H.J.
  4. Proc. of Fouling Mitigation of Industrial Heat Exchange Equipment, An International Conference The influence of liquid flow rate on particle deposition and detachment Adomeit,P.;Renz,U.
  5. Coll. Surf. v.16 Detachment of colloidal hydrous oxide spheres from flat solids exposed to flow: 2. Mechanisms of release Hubbe,M.A.
  6. J. Coll. Interf., Sci. v.114 no.2 Particle adhesion and removal in model systems: X. The effect of electrolytes on particle detachment Kallay,N.;Biskup,B.;Tomic,M.;Matijevic,E.
  7. R & D Progress Report no.571 Scale control in high temperature distillation utilizing fluidized bed heat exchanger Hatch,L.P.;Weth,G.G.
  8. Swiss Chem. v.8 no.5 New developments in fluidized bed heat transfer for preventing fouling Rautenbach,R.;Kollbach,J.
  9. Heat Transfer Engineering v.8 no.4 Continuous cleaning of heat exchanger with recirculating fluidized bed Kollbach,J.;Dahm,W.;Rautenbach,R.
  10. Proc. of fouling Mitigation of Industrial Heat Exchange Equipment, An International Conference Mechanism study on circulating flow of particles within a fluid bed antifouling heat exchanger Tianqing,L.
  11. Proc. of Fouling Mitigation of Industrial Heat Exchange Equipment, An International Conference A study on the pressure loss, heat transfer enhancement and fouling control in liquid fluidized bed heat exchanger Kim,N.H.;Lee,Y.P.
  12. Korean Journal of Air-Conditioning and Refrigeration Engineering v.12 no.9 Measurement of heat transfer rates and pressure drops in a solid particle circulating fluidized heat exchanger Lee,K.B.;Jun,Y.D;Park,S.I.
  13. Proc. of KSME Autumn Annual Meeting Development of a simulation software for the fluidized bed sludge incinerator Kim,T.K;Youn,H.K.;Seung,S.S.;Park,S.W.
  14. Proc. of KSME Autumn Annual Meeting Heat transfer characteristics of organic sludge particles in rotary dryer Chun,W.P.;Lee,K.W.;Park,K.H.;Lee,K.J.;Hwang,H.W.
  15. Korean Journal of Air-Conditioning and Refrigeration Engineering v.14 no.8 Experimental studies on heat transfer in the annuli with corrugated tubes Ahn,S.W.;Son,K.P.