초록
본 논문에서는 지반의 전단파 속도 주상도를 획득하기 위한 현장 시험법으로 표준관입시험 샘플러를 가진원으로 이용한 업홀 시험기법을 연구하였다. 제안된 업홀 시험은 지표면에 여러 개의 속도계를 시추 장비로부터 일정한 간격으로 한 줄로 배치를 하고 표준관입시험의 시료 채취기로부터 발생되는 진동원의 신호를 계측하여 지반의 전단파속도 주상도를 도출하는 방법이다. 여러 선행 실험을 통하여 확립된 업홀 시험 방법 및 결과 분석법에 대해 소개하였다. 진동원과 감지기간의 거리가 멀기 때문에 지반에서 진행되는 전단파의 진행 경로는 지반의 강성 변화에 근거한 굴절 경로를 적용하였다. 국내 3개 시힘 부지에서 수행한 업홀 시힘결과를 동일 부지에서 행한 다운홀, SASW시험 및 SPT-N치와 비교하여 봄으로써 제안된 업홀 시험의 현장 적용성을 확인하였다.
Uphole test is a seismic field test using receivers on ground surface and a source in depth. In this paper, the uphole test using SPT(standard penetration test) which is economical and reliable for obtaining shear wave velocity profile was introduced. In the proposed uphole test, SPT sampler which is common in site investigation, was used as a source and several 1Hz geophones in line were used as receivers. Test procedures in field and interpretation methods for obtaining interval times and for determining shear wave velocity profile considering refracted ray path were introduced. Finally, uphole test was performed at three sites, and the applicability of the proposed uphole test was verified by comparing wave velocity profiles determined by the uphole test with the profiles determined by downhole test, SASW test and SPT-N values.