A Study on the Stem Coefficient of Friction of Motor- operated Gate/Globe halves

  • Published : 2003.04.01

Abstract

Stem-stem nut coefficient of friction(COF) in motor-operated gate/globe valves is one of the important factors which determine the performance of the valve/actuators. The COF is affected greatly by the type and condition of the stem-stem nut lubricants, environmental parameters, surface condition of the stem/stem-nuts, and the number of strokes after the lubrication. In this paper, the measured data of the COFs at stem threads of some safety-related motor-operated gate/globe valves in domestic nuclear power plants are presented. In addition, the performance of the lubricants is evaluated by comparing the COFs among those valves. The results show that the measured COF at torque switch trip are higher than the unwedging COF and conservatively applicable to the unwedging COF. It is also shown that the lubricating performance based on the measured COFs varies with the lubricants.

Keywords

References

  1. J.K. Wang, P.D. Alvarez, M.S. Kalsi, 'Application Guide for Motor-Operated Valves in Nuclear Power Plants, EPRI TR-106563-V1, California(1999)
  2. L.S. Dorfman, R. Bolt, D. Godfrey, J. Carroll, P. Sock, A. DiGiovanni, R. Elfstrom, F. Szanyi, G. Laird, 'EPRI Motor-Operated Valve Performance Prediction Program Stem/Stemnut Lubrication Test Report', EPRI TR-102135, California(1993
  3. 'GATE AND GLOBE VALVE SELECTION PROCEDURE', Limitorque Selection Guide-1, Limitorque Corporation Virginia(1979)
  4. 'LIMITORQUE TYPE SMB Instruction and Maingtenance Manual', 13081-P402- A-, p. 39, Limitorque Corporation(1982)
  5. P. S. Damerell, S. Daubresse, 'Methods to Address Rate-Of-Loading in Torque Switch Controlled MOVs', EPRI TR-103226, California(1994)
  6. Ronald H. Dieck, 'Measurement Uncertainyt methods and application', 1st ed., p.228, Instrument Society of America, North Carolina(1992)
  7. T. Walker, L. Ridzon, P. Damerell, 'Use of Static Closure Data for Determining the Stem-to-Stem Nut Coefficient of Friction at Unwedging, EPRI TR-113989(Addendum 4 to TR-103237-R2), p. 35, California(1999)
  8. F.M. Guerout, R. Houot, D.A.E. Grandison, and J. Janis, 'ACEL Qualification of Grease for Motor-Operated Valve Stem/Stem Nut Lubrication', EPRI TR-106825, p. 61, California