Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on machining characteristics of the Electropolishing of Aluminum alloy

알루미늄 합금의 전해연마 가공특성에 관한 연구

  • 이은상 (인하대학교 기계공학과) ;
  • 김창근 (인하대학교 대학원 기계공학과)
  • Published : 2003.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

Electropolishing is the electrolytic removal of metal in a highly ionic solution by means of an electrical potential and current. It is normally used to remove a very thin layer of material on the surface of a metal part or component. Electropolishing is able to enhance the material properties of a workpiece and to change its physical dimensions. Also, It is suitable for the polishing of both complex shapes and hardened materials, which are difficult to machine mechanically. therefore, the aim of the present study is to investigate the characteristic of Electropolishing A12024 in terms of current density, polishing time and electrode gap, etc.

Keywords

References

  1. Praktische Metallographie v.30 Electropolishing of Copper and Copper Base Alloy for Metallographic Inspection Kovacheva, R.;Dafinova, R.;Gidikova, N.
  2. Praktische Metallographie v.30 Eletrolytic Polishing of Zn-Al-Cu Alloys Kovacheva, R.;Zadgorshy, S.;Lilova, A.
  3. Materials Characterization v.28 A New Electropolishing Technique for Metallographic Specimen Preparation of Zinc adn Zinc Alloy Kovacheva, R.;Gidikova, N.;Lilova, A. https://doi.org/10.1016/1044-5803(92)90082-S
  4. Electrochemica Acta v.36 no.1 A Contribution to the Study on Electropolishing of Mild Steel and Aluminum using Alternating Current Labarga, J. E.;Bastidast, J. M.;Feliut, S. https://doi.org/10.1016/0013-4686(91)85184-9
  5. Materials Characterization v.38 no.4-5 Electropolishing of Al-7Si-0.3Mg Cast Alloy by Using Perchoric and Nitric Acid Electrolytes Murali, S.;Ramachadra, M.;Murthy, K. S. S.;Raman, K. S. https://doi.org/10.1016/S1044-5803(97)00085-5
  6. International Journal of Fatigue v.17 no.2 Effect of Electropolishing on the Room- Temperature Low-Cycle Fatigue Behaviour of AISI 304LN Stainless Steel Raman, G. S.;Padmanabhan, K. A. https://doi.org/10.1016/0142-1123(95)98938-Y
  7. International Journal of KSPE v.2 no.1 Development of Ultra Clean Maching Technology with Electrolytic Polishing Process Lee, E. S.;Park, J. W.;Moon, Y. H.
  8. Proceedings of the 80th AESF Annual Study of a New Stainless Steel Electropolishing Process Carie, J. P.;Chainet, E.;Nguyen, B.;Valenti, P.