참고문헌
- Haggerty, W. A., 'Effect of Point Geometry and Dimensional Symmetry on Drill Performance,' Int. J. Mach. Tool Des. Res., Vol. 1, pp. 41-48, 1961 https://doi.org/10.1016/0020-7357(61)90043-9
- Gillespie, L. K., Unclassified Topical Report, BDX-613-1248, Bendix Corporation, 1975
- Gillespie, L. K., Unclassified Topical Report, BDX-613-1502, Bendix Corporation, 1976
- Gillespie, L. K. and Blotter, P. T., 'The Formation Properties of Machining Burrs,' J. Eng. Ind., Vol. 98, pp. 66-74, 1976 https://doi.org/10.1115/1.3438875
- Pande, S. and Relekar, H., 'Investigation on Reducing Burr Formation in Drilling,' Int. J. Mach. Tool Des. Res., Vol. 26, pp. 339-348, 1986 https://doi.org/10.1016/0020-7357(86)90010-7
- Stein, J. M., Burr Formation in Precision Drilling of Stainless Steel, Ph. D. Dissertation, University of California, Berkeley, 1995
- Stein, J. M. and Dornfeld, D. A., 'Burr Formation in Drilling Miniature Holes,' Annals of the CIRP, Vol. 46, pp. 63-66, 1997 https://doi.org/10.1016/S0007-8506(07)60776-8
- Sofronas, A., The Formation and Control of Burrs, Ph. D. Dissertation, University of Detroit, 1975
- Shikata, H., Devries, M., F. and Wu, S. M., 'Experimental Investigation of Sheet Metal Drilling,' Annals of the CIRP, Vol. 29, p. 85, 1980 https://doi.org/10.1016/S0007-8506(07)61300-6
- Miyake, T., Yamamoto, A., Kitajima, K., Tanaka, Y. and Takazawa, K., 'Study on Mechanism of Burr Formation in Drilling,' J. of the Japan Society of Precision Engineering, pp. 87-92, 1991
- Saunders, L. K. L. and Mauch, C. A., 'An Exit Burr Model for Drilling of Metals,' Proc. of the ASME MED, Vol. 8, pp. 187-192, 1998
- Guo, Y. and Dornfeld, D. A., 'Intergration of CAD of Drill with FEA of Drilling Burr Formation,' Trans. of NAMRI/SME, Vol. XXVI, pp. 201-205, 1998
- Min, S., Kim, J. and Dornfeld, D. A., 'Development of a Drilling Burr Control Chart for Low Alloy Steel, J. Mater. Process. Tech., Vol. 113, pp. 4-9, 2001 https://doi.org/10.1016/S0924-0136(01)00589-1
- Min, S., Kim, J. and Dornfeld, D. A., 'Optimization and Control of Drilling Burr Formation of AISI 304L and AISI 4118 Based on Drilling Burr Control Charts,' Int. J. Mach. Tools & Manufac., Vol. 41, pp. 923-936, 2001 https://doi.org/10.1016/S0890-6955(00)00131-0
- Ko, S. L. and Lee, J. K., 'Analysis of Burr Formation in Drilling with a New-Concept Drill,' J. Mater. Process. Tech., Vol. 113, pp. 392-398, 2001 https://doi.org/10.1016/S0924-0136(01)00717-8
- Ko, Dae-Cheol and Ko, Sung-Lim, 'Development of a Module to Predict Burr Formation using the Finite Element Method,' J. of Korean Society of Precision Engineering, Vol. 17, No. 10, pp. 163-170, 2000
- Zienkiewicz, O. C., The Finite Element Method, 3rd Edition, McGraw-Hill, 1977
- Kobayashi, S., Oh, S. I. and Altan, T., Metal Forming and the Finite Element Method, Oxford University Press, 1989