참고문헌
- Bindon, J. P. and Morphis, G., 1992, 'The Development of Axial Turbine Leakage Loss for Two Profield Tip Geometries Using Linear Cascade Data,' ASME J. Turbomachinery, Vol. 114, No. 1, pp. 198-203 https://doi.org/10.1115/1.2927985
- Chernobrovkin, A., 1999, Numerical Simulation of Complex Turbomachinery Flows, PhD Thesis, The Pennsylvania State University
- Chien, K. Y., 1982, 'Predictions of Channel and Boundary Layer Flows with a Low-Reynolds-Number Turbulence Model,' AIAA J., Vol. 20, No. 1, pp. 33-38 https://doi.org/10.2514/3.51043
- Cho, H. H., Rhee, D. H. and Choi, J. H., 2001, 'Heat/Mass Transfer Characteristics on Turbine Shroud with Blade Tip Clearance,' Annals of the New York Academy of Sciences, Vol. 934, pp. 281-288 https://doi.org/10.1111/j.1749-6632.2001.tb05861.x
- Gregory-Smith, D. G. and Cleak, J. G. E., 1992, 'Secondary Flow Measurements in a Turbine Cascade with High Inlet Turbulence,' ASME J. Turbomach., Vol. 114, pp. 173-180 https://doi.org/10.1115/1.2927981
- Hah, C., 1984, 'A Navier-Stokes Analysis of Three-Dimensional Turbulent Flows inside Turbine Blade Rows at Design and Off-Design Conditions,' ASME J. Eng. Power, Vol. 106, pp. 421-429 https://doi.org/10.1115/1.3239582
- Ho, Y. and Lakshminarayana, B., 1994, 'Computational Modeling of Three Dimensional Endwall Flow Through a Turbine Rotor Cascade with Strong Secondary Flows,' ASME paper 94 GT-136
- Klein, A., 1966, 'Untersuchungen ber die Einfluss der Zustr mgrenzschicht auf die Sekund rstrmung in den Beschaufelunger von Axialturbinen,' Forsch. Ing., Bd 32, Nr 6
- Lakshminarayana, B., 1996, Fluid Dynamics and Heat Transfer of Turbomachinery, John Wiley & Sons, Inc.
- Langston, L. S., Nice, M. L. and Hooper, R. M., 1977, 'Three-Dimensional Flow within a Turbine Cascade Passage,' ASME J. Eng. Power, Vol. 99, pp. 21-28 https://doi.org/10.1115/1.3446247
- Langston, L. S., 1980, 'Cross Flow in a Turbine Cascade Passage,' ASME J. Eng. Power, Vol. 102, pp. 866-874 https://doi.org/10.1115/1.3230352
- Lee, H. G., 1995, Calculation of Turbulent Flows through Turbine Cascades with and without Tip clearance, PhD Thesis, Seoul National University
- Myong, H. K., Park, H. K. and Jin, E., 1996, 'Simulation of Three-Dimensional Turbulent Flows around an Ahmed Body-Evaluation of Finite Differencing Schemes -,' Trans. KSME (B), Vol. 20, No. 11, pp. 2589-3597
- Sjolander, S. A., 1997, 'Secondary and Tip-Clearance Flows in Axial Turbines : Physics of Tip-Clearance Flows-I,' von Karman Institute of Fluid Dynamics, Lecture Series 1997-01
- Tallman, J. and Lakshminarayana, B., 2000, 'Numerical Simulation of Tip Leakage Flow in Axial Flow Turbines, with Emphasis on Flow Physics, Part I : Effect of Tip Clearance Height,' ASME Paper, No. 2000-GT-0514
- Yamamoto, A., 1989, 'Endwall Flow/Loss Mechanisms in a Linear Turbine Cascades with Blade Tip Clearance,' ASME J. Turbomach., Vol. 111, pp. 264-275 https://doi.org/10.1115/1.3262265
- Yoo, J. Y. and Yun, J. W., 1994, 'Calculation of a 3D Turbine Cascade Flow,' Computational Mechanics, Vol. 14, pp. 101-115 https://doi.org/10.1007/BF00350278