Abstract
In this paper, genetic algorithm (GA)-based Thin Film Bulk Acoustic Resonator (FBAR) RF filter design technique is proposed. Since the BVD(Butterworth-Van Dyke) lumped element model is valid only around the resonance, FBAR filter design technique based on BVD circuit has an approximate error. Instead of using BVD model, optimizing filter design method utilizes an analytical electrical impedance equation of FBAR. The geometry of FBAR such as thickness of the piezoelectric layer and area which significantly affect the filter response is optimized by GA. US-PCS Rx Bandpass filter obtained by the proposed technique shows a better response comparing with the typical and BVD-based filter.
본 논문에서는 유전자 알고리즘을 이용한 박막 체적 공진기 대역통과 여파기 설계기법을 제안하였다. 기존의 BVD등가모델을 이용한 여파기 설계기법은 공진 모드에서의 공진기의 임피던스 특성을 몇 개의 집중 소자로 근사함으로써 생기는 오차를 포함하고 있다. 본 논문에서는 공진기의 전기적 임피던스 특성식 자체를 이용한 최적화 FBAR여파기 설계기법을 제안하였다. 유전자 알고리즘을 적용하여 설계기준을 만족하도록 공진기의 두께 및 면적을 최적화하였다. 첫 번째 유전자 알고리즘은 사다리형 여파기의 직렬/병렬 공진기의 직렬/병렬 공진 주파수가 통과대역의 중심주파수와 일치하도록 각 공진기의 압전 물질 두께를 최적화하였다. 두 번째 유전자 알고리즘은 설계하고자하는 대역통과 여파기 특성을 만족시키기 위한 각 공진기의 면적을 최적화하였다. 제안된 방법을 이용하여 설계된 US-PCS 수신 대역통과 여파기는 기존의 방법 및 BVD모델을 이용한 설계결과와 비교하여 우수한 응답특성을 나타내었다.