제상 히터와 냉장고 플라스틱 내벽 사이의 안전거리에 대한 모델링

Modeling of the Safety Distance between Defrost Heater and Plastic Inner Wall of Refrigerator

  • 정영 (LG전자 디지털 어플라이언스 사업본부 연구소) ;
  • 신종민 (LG전자 디지털 어플라이언스 사업본부 연구소) ;
  • Jung, Young (Digital Appliance Company Research Lab., LG Electronics) ;
  • Shin, Jong-Min (Digital Appliance Company Research Lab., LG Electronics) ;
  • Tikhonov, Alexei V. (Digital Appliance Company Research Lab., LG Electronics)
  • 발행 : 2003.03.01

초록

Two dimensional modeling was carried out to find the safety distance between the defrost heater and the plastic inner wall of domestic refrigerator Estimation was processed for the three cases; the estimation of plastic wall temperature (1) without any protection, (2) with an aluminum foil attached on a wall, and (3) with an aluminum shield installed between heater and wall. The former two cases are found to be dangerous during defrosting process, because the temperatures of inner wall reach above 80'C , which is the upper temperature limit of the wall material. The case with an aluminum shield is considered to be safe by maintaining the temperature of the wall in the range of 6$0^{\circ}C$ during defrosting process.

키워드

참고문헌

  1. ASME v.4 Characteristics on heat pump system due to frosting Aoki, K.;Hattori, M.;Edayoshi, A.
  2. ASME paper 81 - WA/HT A study of the melting process in ice-air composite meterials Aoki, K.;Hattori, M.;Chiba, S.;Haya-shi, Y.
  3. JSME International Journal series Ⅱ v.31 no.2 Snow melting by heating from the bottom surface Aoki, K.;Hattori, M.;Ujiie, T.
  4. JSME(B) v.59 no.567 Snow melting mechanism of radiative heat ansorption meterial Inaba, H.;Otake, H.
  5. JSME(B) v.58 no.555 Fundamental study on a horizontal frost layer melted from above by radiative heat Inaba, H.;Otake, H.;Nozu, S.
  6. ASME v.118 Study on sublimation phenimenon of horizontal frost layer exposed to forced convection air flow and radiation heat Inana, H.;Imai, S.
  7. JSME(B) v.54 no.508 The melting behavior of an ice particles layer on a heated base with fins Sugawara, M.;Kirihoshi, C.;Fujita, T.
  8. JSME(B) v.55 no.510 Study of melting of frost on heat exchanger for heat pump Sugawara, M.;Uemura, S.;Yajima, R.;Ki-rikoshi, C.;Fujita, T.
  9. JSME(B) v.56 no.531 Melting of frost on heat exchanger of a heat pump Sugawara, M.;Uemura, S.;Yajima, R.;Ta-kahashi, T.;Fujita, T.
  10. JSME(B) v.57 no.537 A basic study of defrost of heat exchanger Sugawara, M.;Sakae, S.;Fujita, T.
  11. IEEE Transactions on Industry Applications v.24 no.1 Adaptic defrost Allard, J.;Heinzen, R.
  12. Fundamentals of Heat and Mass Transfer Frank P. Incroper;David P. Dewitt
  13. Fundamentals of Heat and Mass Transfer Frank P. Incroper;David P, Dewitt
  14. Fundamentals of Heat and Mass Transfer Frank P. Incroper;David P. Dewitt