하이브리드 FRP 리바의 역학적 특성

Mechanical Properties of Hybrid FRP Rebar

  • 발행 : 2003.03.01

초록

Over the last decade fiber-reinforced polymer (FRP) reinforcement consisting of glass, carbon, or aramid fibers embedded in a resin such as vinyl ester, epoxy, or polyester has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. But reinforcing rebar for concrete made of FRP rebar has linear elastic behavior up to tensile failure. For safety a certain plastic strain and an elongation greater than 3% at maximum load is usually required for steel reinforcement in concrete structures. The same should be required for FRP rebar. Thus, the main object of this study was to develop new type of hybrid FRP rebar Also, this study was evaluated to the mechanical properties of Hybrid FRP rebar. The Manufacture of the hybrid FRP rebar was achieved by pultrusion, and braiding and filament winding techniques. Tensile and interlaminar shear test results of Hybrid FRP rebar can provide its excellent tensile strength-strain behavior and interlaminar stress-strain behavior.

키워드

참고문헌

  1. ACI. (2000). Guide for the Design and Construction of Concrete Reinforced with FRP bars American Concrete Institute Committee 440
  2. ASTM D 4475. (1996). Standard Test Method for Apparent Horizontal Shear Strength of Pultruted Reinforced Plastic Rods By The Short Beam Method. November
  3. Bakis, C. E., Nanni, A., and Terosky, J. A. (1996). Smart Pseudo-Ductile, Reinforcing Rods for Concrete: Manufacture and Test. Proc. 1st Int. Conf. On Composites in Infrastructures, ICCI 96, Tucson, Arizona: 95-108
  4. Benmokrane, B., and Masmoudi, R. (1996). FRP C-Bar as Reinforcing Rod for Concrete Structures. Proc. Of Advanced Composite Materials in Bridges and Structure 2nd International Conference, Ed. M. M. El-Badry, Montreal, Quebec, Canada, August
  5. Castro, P. F., and Carino, N. J. (1998). Tensile and Non-Destructive Testing of FRP bars. J. Compo Constr., Vol. 2, No.1, February: 17-27
  6. EN ISO/F-DIS 527-4. (1996 A). Plastics Determination of tensile properties. Part 4-Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  7. EN ISO/F-DIS 527-5 (1996 B). Plastics Determination of tensile properties. Part 5 -Test conditions for unidirectional fibre-reinforced plastic composite
  8. Erki, M. A., and Ritzkalla, S. H. (1993). Anchorages for FRP Reinforcement. Concrete Int., Vol. 15, No.6: 54-59
  9. Faza, S., and Ganga Rao, H. (1993). Glass FRP Reinforcing Bars for Concrete, Fiber-Reinforced Plastics (FRP) Reinforcement for Concrete Structures Properties and Applications. A. Nanni Ed., Elsevier Pub. Co. Inc., NY: 167-188
  10. Ferry, J. D. (1961). Viscoelastic Properties of Polymers. John Wiley & Sons, Inc., New York
  11. A. Nanni (1993). Fiber-Reinforced Plastics (FRP) Reinforcement for Concrete Structures Properties and Applications. Elsevier Pub. Co. Inc., NY: 167-188