An Experimental Study on the Axial Impact Collapse Characteristics of Spot Welded Section Members

  • Cha, Cheon-Seok (Division of Aerospace and Naval Architectural Engineering Chosun University) ;
  • Beak, Kyung-yun (Department of Mechanical Design Engineering Graduate School, Chosun University) ;
  • Kim, Young-Nam (Division of Mechanical Engineering, Chosun University) ;
  • Park, Tae-Woung (Division of Aerospace and Naval Architectural Engineering Chosun University) ;
  • Yang, In-Young (Division of Mechanical Engineering, Chosun University)
  • 발행 : 2003.03.01

초록

The spot welded sections of automobiles (hat and double hat shaped sections) absorb most of the energy in a front-end collision. The target of this paper is to analyze the energy absorbing capacity of the structure against the front-end collision, and to obtain useful information for designing stage. Changed the spot welded pitches on the flanges, the hat and double hat shaped section members were tested on the axial collapse loads at various impact velocities. It was expected that para-closed sections would show collapse characteristics which be quite different from those of perfectly closed sections. Hat shaped section members were tested at the impact collapse velocities of 4.72m/sec, 6.54m/sec and 7.1m/sec and double hat shaped section members were tested at the impact collapse velocities of 6.54m/sec, 7.1 m/sec and 7.27m/sec.

키워드

참고문헌

  1. John Fenton, 'Handbook of Vehicle Design Analysis,'Society of Automotive Engineers, Inc, pp. 9-12, 1996
  2. Haug, E., Clinckemaillie, J., Ni, X. A., Pickett, K. and Queckborner, T., 'Recent Trends and Advances in Crash Simulation and Design of Vehicles,' Proceedings of the NATO-ASI, pp. 343-359, July 1996
  3. Avalle, M. and Belingardi, G., 'Experimental Evaluation of the Strain Field History During Plastic Progressive Folding of Aluminium Circular Tubes,'International Joumal of Mechanical Science, Vol. 39, No. 5, pp. 575-583, 1997 https://doi.org/10.1016/S0020-7403(96)00063-X
  4. Singace, A. A., 'Axial Crushing Analysis of Tubes Deforming in the Multi-Lobe Mode,' International Journal of Mechanical Science, Vol. 41, pp. 865-890, 1999 https://doi.org/10.1016/S0020-7403(98)00052-6
  5. White, M. D. and Jones, N., 'Experimental Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Joumal of Mechanical Science, Vol. 41, pp. 179-208, 1999 https://doi.org/10.1016/S0020-7403(98)00047-2
  6. White, M. D., Jones, N. and Abramowicz, W., 'A Theoretical Analysis for the Quasi-Static Axial Cmshing of Top-Hat and Double-Hat Thin-Walled Sections,' International Joumal of Mechanical Sciences, Vol. 41, pp. 209-233, 1999 https://doi.org/10.1016/S0020-7403(98)00048-4
  7. Yamaxaki Koetsu and Han Jing, 'Maximization of Crushing Energy Absorption of Tubes,' The American Institute of Aeronautics and Astronautics, pp. 2708-2717, 1998
  8. Santosa, S. and Wierzbicki, T., 'Crash Behavior of Box Columns Filled with Aluminum Honeycomb Foam,' Computers & Structures, pp. 333-367, 1998