The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Design and Efficiency Characteristic Test of 340W Home Appliance Synchronous Reluctance Motor

가전용 340W급 동기형 릴럭턴스 전동기 설계 및 효율특성 실험

  • Published : 2003.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with an automatic design procedure for the maximum torque density and power factor in a synchronous reluctance motor (SynRM). The focus of this paper is the design relative to the number of flux barrier and the ratio Kw of flux barrier width to iron sheet width of a SynRM under the mechanical constraint. The Finite Elements Analysis (FEA) has been used to evaluate the maximum torque density and power factor with each rotor shape. The proposed procedure allows to define the rotor geometric dimensions starling from an existing mootor or a preliminary design. The maximum torque density and power factor of a SynRM has been resulted with the rotor design variation. To prove the propriety of the designed SynRM, the Digital Signal Processor (DSP) installed experimental devices are equipped and the efficiency characteristic test is Performed.

Keywords

References

  1. J. H. Lee, D. S. Hyun, 'Hysteresis Characteristics Computation on PWM Fed Synchronous Reluctance Motor Using Coupled FEM & Preisach Modeling', IEEE Transaction on Magnetics, Vol. 36, No. 7, pp. 1209-1212, July 2000 https://doi.org/10.1109/20.877657
  2. J. H. Lee, J. C. Kim, D. S. Hyun, 'Hysteresis Modelling of Synchronous Reluctance Motor Considering PWM input Voltage', Journal of Physica B, Vol. 275, pp. 238-247, Jan. 2000 https://doi.org/10.1016/S0921-4526(99)00778-4
  3. J. H. Lee, D. S. Hyun, 'Hystersis Analysis for Permanent Magnet Assisted Synchronous Reluctance Motor by Coupled FEM & Preisach Modelling', IEEE Transaction on Magnetics, Vol. 35, No. 5, pp. 1203-1206, May 1999 https://doi.org/10.1109/20.767165
  4. J. H. Lee, J. C. Kim, D. S. Hyun, 'Effect of Magnet on Ld and Lq Inductance of Permanent Magnet Assisted Synchronous Reluctance Motor', IEEE Transaction on Magnetics, Vol. 35, No. 5, pp. 1199-1202, May 1999. https://doi.org/10.1109/20.767164
  5. J. C. Kim, J. H. Lee, I. S. Jung, D. S. Hyun, 'Vector Control Scheme of Synchronous Reluctance Motor Considering Iron Core Loss', IEEE Transaction on Magnetics, Vol. 34, No. 5, pp. 2522-2525, Sep. 1998 https://doi.org/10.1109/20.717831
  6. J. H. Lee, J. C. Kim, D. S. Hyun, 'Dynamic Characteristic Analysis of Synchronous Reluctance Motor Considering Saturation and Iron Loss by FEM', IEEE Transaction on Magnetics, Vol. 34, No. 5, pp. 2629-2632, Sep. 1998 https://doi.org/10.1109/20.717608
  7. 이중호, 현동석, '철손을 고려한 동기형 릴럭턴스 전동기의 유한요소해석', 대한전기학회 논문지, 제48권, 제4호, pp. 187-193, 1999. 4
  8. 이중호, 김정철, 현동석, 단편형 회전자구조 동기형 릴럭턴스전동기와 유도전동기의 특성비교에 관한 연구', 대한전기학회논문지, 제47권, 제9호, pp. 1343-1350, 1998. 9
  9. 이중호, 김정철, 현동석, '철손의 영향을 고려한 단편형 동기형 릴럭턴스 전동기의 벡터제어', 대한전기학회논문지, 제47권, 제8호, pp. 1162-1168, 1998. 8
  10. 이중호, 현동석, '유한요소법을 이용한 단편형 회전자구조 동기형 릴럭턴스 전동기의 특성해석', 대한전기학회논문지, 제47권, 8호, pp. 1116-1122, 1998. 8
  11. 장석명, 박병임, 이성호, 이중호,' 단편형 동기 릴럭턴스 전동기의 토크 및 역율개선을 위한 회전자 설계, 대한전기학회논문지, 제50권, 6호, pp. 263-272, 2001. 6
  12. Alfredo Vagati, Aldo Canova, Mario Chiampi, Michele Pastorelli, Maurizio Repetto 'Improved of Synchronous Reluctance Motor Design through Finite-Element Analysis', IEEE Industry Applications Meeting Volume 2, pp.862-870, 1999 https://doi.org/10.1109/IAS.1999.801610
  13. Takayoshi Matsuo, Thomas A.Lipo, 'Rotor Design Optimization of Synchronous Reluctance Machine', IEEE Transaction on Energy Conversion, Vol.9, No. 2, pp. 359-365, June 1994 https://doi.org/10.1109/60.300136
  14. Hiroyuki Kiriyama, Shinichiro Kawano, Yukio Honda, Toshiro Higaki, 'High Performance Synchronous Reluctance Motor with Multi-flux Barrier for the Appliance Industry', IEEE Industry Application vol. 1, pp. 111-117, 1998 https://doi.org/10.1109/IAS.1998.732268