참고문헌
- Kim, J., 1983, 'The Effect of Rotation on the Turbulent Structure,' Proc. of 4th International Symposium on Turbulent Shear Flows, Karlsruhe, pp. 6-14.
- Tafti, D.K. and Vanka, S.P., 1991, 'A Numerical Study of the Effect of Span-wise Rotation on Turbulent Cannel Flow,' Phys. Fluids A, Vol. 3, No. 4, pp. 642-656 https://doi.org/10.1063/1.858215
- Koyama, D.K. and Ohuchi, M., 1985, Proc. of 5th International Symposium of Turbulent Shear Flows, Cornell, pp. 21-19
- Kristofferson, R., Nilsen, RJ. and Andersson H. I., 1990, 'Validation of Reynolds Stress Closures for Rotating Channel Flows by Means of Direct Numerical Simulations,' Proc. International Symposium on Engineering Turbulence Modeling and Measurements, Dubrovinik, pp. 55-64
- Launder, B.E., Tselepidalsis, D.R and Younis, B.A., 1987, 'A Second-Moment Closure Study of Rotating Channel Flow,' J. Fluid Mech., Vol. 183, pp. 63-75 https://doi.org/10.1017/S0022112087002520
- Launder, B.E. and Tselepidalsis, D.P., 1994, 'Application of a New Second Moment Closure to Turbulent Channel Flow Rotating in Orthogonal Mode,' International Journal of Heat and Fluid Flow, Vol.15, No.l, pp. 2-10 https://doi.org/10.1016/0142-727X(94)90025-6
- Johnston, J. P., Halleen, R. M., and Lezius, D. K., 1972, 'Effects of Spanwise Rotation on the Structure of Two-Dimensional Fully Developed Turbulent Channel Flow,' J. Fluid Mech. Vol.56. No.3, pp. 533-557 https://doi.org/10.1017/S0022112072002502
- Kristofferson, R., and Andersson H. I., 1993, 'Direct Numerical Simulations of Low Reynolds Number Turbulent Flow in a Rotating Channel, J. Fluid Mech., Vol. 256, pp. 163-197 https://doi.org/10.1017/S0022112093002757
- Anderson, H. I., and Kristoffersen, R., 1995, 'Turbulent Statistics of Rotating Channel Flow, Turbulent Shear Flow, Vol. 9, Springer, Berlin, pp. 53-70
- Pattersson, B. A., and Anderson, H. 1., 1997, 'Near-Wall Reynolds-Stress Modeling in Noninertial Frames of Reference,' Fluid Dynamics Res., Vol. 19, pp. 251-276 https://doi.org/10.1016/S0169-5983(96)00039-1
- Morris, W. D., 1981, 'Heat Transfer and Fluid Flow in Rotating Coolant Channels,' Chichester: John Wiley and Sons
- Kajishima, T., Miyake, Y., and Nishimoto, 1991, 'Large Eddy Simulation of Turbulent Flow in a Square Duct, Trans. JSME(B) 57-540, pp. 2530-2537 https://doi.org/10.1299/kikaib.57.2530
- Murata, A., and Mochizuki, S., 1999, 'Effect of Cross-Sectional Aspect Ratio on Turbulent Heat Transfer in an Orthogonally Rotating Rectangular Smooth Duct,' International J. of Heat and Mass Transfer, Vol. 42, pp. 3803-3814 https://doi.org/10.1016/S0017-9310(99)00058-7
- Bo, T, Iacovides, H., and Launder, B. E., 1995, 'Developing Buoyancy-Modified Turbulent Flow in Ducts Rotating in Orthogonal Mode,' Trans. ASME, J. of Turbomachinery, Vol. 117, pp. 65-95
- Younis, B. A., 1993, 'Prediction of Turbulent Flows in Rotating Rectangular Ducts,' Trans. ASME, J. of Fluids Eng., Vol. 115, pp. 646-652 https://doi.org/10.1115/1.2910193
-
Lee, G. H., 1992, 'Study on the Characteristics of Turbulent Flow in a Rotating Square Sectioned
$90^{\circ}$ Bend' Doctoral thesis, Korea Univ. - Champagne, F. H., Sleicher, C. A., and Wehrmann, O. H., 1967, 'Turbulence Measurements with Inclined Hot-Wire,' J. Fluid Mech., Vol. 28, part 1, pp. 153-175 https://doi.org/10.1017/S002211206700196X
-
Choi, Y. D., Shin, J. K., Chun, K. H.. and Humphrey, J. A. C, 1997, 'Modeling Turbulent Flow in a Curved Duct of Square Cross-Section,' Proc. of
$11^{th}$ Symposium on Turbulent Shear Flows, Grenoble, France, pp. 3.47-3.52 - Choi, Y D., Moon, C, and Yang, S. H., S. H., 1990, ' Measurement of Turbulent Flow Characteristics of Square Duct with a 180 Degree Bend by Hot-Wire Anemometer,' Proc. of the International Symposium on Turbulence Modeling and Experiments, Dubrovnik, pp. 429-438
- Jackson, T. W, and Lilly, D. G, 1983, 'Single Wire Swirl Flow Turbulence Measurement,' AIAA 83-1202, Cleveland, Ohio
- Janjua, S. I., Mclaug, D. K., Jackson, T. W., and Lilly, D. G, 1982, 'Turbulence Measurements in a Confined Jet Using a Six-Orientation Hot-Wire Probe Technique,' AIAA 82-1262, Cleveland, Ohio