Mechanical Characteristics Evaluation of Metal Matrix Composites Cylinder Linear Fabricated by Thixoforging Process

Thixoforging Process에 의하여 제조한 금속복합재료 실린더라이너 부품의 기계적 특성 평가

  • 허재찬 (부산대 대학원 기계공학부) ;
  • 이승후 (부산대 대학원 기계공학부) ;
  • 강충길 (부산대 기계공학부, 정밀정형 및 금형가공연구소 (ERC/NSDM))
  • Published : 2003.02.01

Abstract

The conventional forming process such as squeeze casting or die casting for fabricating metal matrix composites products have a disadvantage such as non homogenous distribution of reinforcement, weak bonding between matrix and reinforcement and cost increase in parts fabrication. Thixoforming process has been accepted as a new method for fabricating the net shaped metal matrix composites with lightweight and wear resistance. In this paper, the effect of volume fraction and reinforcement sizes on mechanical properties in cylinder liner part of metal matrix composites has been investigated with processes parameters such as pressure and velocity. Moreover, the methods to obtain the thixoforged composites cylinder liner with high quality has been proposed. To evaluate the composites cylinder linear fabricated at the conditions proposed in this study, mechanical properties of fabricated composites cylinder linear were compared with those of commercial composites cylinder linear.

Keywords

References

  1. Kiuchi, M., Sugiyama, S., 'Mushy-State Rolling of Sheet Metals Laminated with Composite Layers,' J. of the JSTP, Vol. 42, No. 482, pp. 173-178, 2001
  2. Rohati, P. K., Guo, R. Q. and Weiss, D., 'Aluminum Matrix Composites Castings,' Proc. from Materials Solutions Conf. '98 on Aluminum Casting Technology, 12-15, pp. 101-107, Oct. 1998
  3. Clyne, T. W., Mason, J. F., 'The Squeeze Infiltration Process for Fabrication of Metal Matrix Composites,' Met. Trans. A, Vol. 18A, pp. 1519-1530, 1987
  4. Kang, C. G.., Ku, G.. S., 'An Experimental Investigation on Infiltration Limit and the Mechanical Properties of $Al_2O_3$ Short Fiber Reinforced Metal Matrix Composites Fabrication by Squeeze Casting,' J. of Composites Materials, 29-4, pp. 444-462, 1995 https://doi.org/10.1177/002199839502900402
  5. Kang, C. G.., Kim, K. S. and Ku, G. S., 'Fabrication of Metal Matrix Composites by Die Casting Techniques and Evaluation of their Mechanical Properties,' J. of Material Processing Technology, 62, pp. 116-123,1996 https://doi.org/10.1016/0924-0136(95)02233-3
  6. Andeson, P. R. G., McLelland, A. R. A. and Ward, P. J., 'Thixoforming of Aluminium-Based Metal Matrix Composites Systems,' SAE Transaction, pp. 605-620, 1994
  7. Kim, M. G., Kim, S. K., Hong, T. W. and Kim, Y. J., 'A Study on Thixoforming of SiCp/AZ91HP Magnesium Composites,' J. of Kor. Inst. Met. & Mater., Vol. 38, No. 11, pp. 1498-1502, 2000
  8. Kang, C.G.., Youn, S.W, Seo, P.K., 'Reheating Process of Metal Matrix Composites for Thixoforming and Their Inductive Coil Design,' J. of Materials Engineering and Performance 2002; 11 (2): 152 https://doi.org/10.1361/105994902770344213
  9. Heo, J. C, Kang, C. G., 'Digital Manufacturing Technology for Thixoforging of Particulate Reinforced Metal Matrix Composites with Pipe Shape,' J. of the Korean Foundrymen's Society to be accepted for pub, 2002
  10. Lee, S. H., Heo, J. C. and Kang, C. G.., 'Thixoforging Process and the Ploblems of Hollow Type Metal Matrix Composites Part,' Proc. of the Korean Society of Precision Engineering Fall Annual Meeting, KyungHee university, Suwon, pp. 808-811, 2001
  11. Ahn, S. S., Kang, C. G.. and Jo, H. H., 'Induction Heating of Metal Matrix Composites for Thixoforming,' 2nd Asia-Australians Conf. on Composites Materials (ACCM-2000), Kyongju, Korea, 8-20, pp. 309-314, Aug. 2000
  12. Jung, H. K., Kang. C. G.., 'An Induction Heating Process with Coil Design and Solutions Avoiding Coarsening Phenomena of Al-6 pct, Si-3 pct, Cu-0.3 pet, Mg Alloy for Thixoforming,' Metallurgical and Materials Transaction A, Vol. 30A, No. 12, pp. 2967-2977,1999 https://doi.org/10.1007/s11661-999-0134-5
  13. Kang, C. G.., 'Continuous Casting for Al Metal Matrix Composites & Development of Parts by Thixoforming,' Technical Report, Eng. Research Center for Net Shape and Die Manufacturing, Pusan National University, Korea, 2001