참고문헌
- Veslocki, T. A., Smith, C. C. and Kelly, C. D., 1986, 'Automatic Slab Heating Control at INLAND'S 80-IN HOT STRIP MILL,' Iron & Steel Engineer, Vol. 63, No. 12, pp. 47~54
- Huang, C. H., Ju, T. M. and Tseng, A. A., 1995, The Estimation of Surface Thermal Behavior of the Working Roll in Hot Rolling Process, International Journal of Heat and Mass Transfer, Vol. 38, pp. 1019-1031 https://doi.org/10.1016/0017-9310(94)00218-K
- Kwag, D.S., Kim,W.S. and Lee, K.S, 2000, Inverse Problem of Determining the Unknown Wall Heat Flux in a Single Screw Extruder, 4th JSME-KSME Thermal Engineering Conference, Vol. 1, pp. 517-522, Kobe, Japan
- Huang, C. H. and Hsiung, T. Y., 1999, An Inverse Design Problem of Estimating Optimal Shape of Cooling Passages in Turbine Blades, International Journal of Heat and Mass Transfer, Vol.42, pp. 4307-4319 https://doi.org/10.1016/S0017-9310(99)00090-3
- Hollander, F. and Zuurbier, S. P. A., 1985, 'Accurate Temperature Control of the Reheating Process at Mixed Cold and Hot Charging,' Proceedings of the International Conference on Process Control and Energy Savings in Reheating Furnaces, Vol. 36, No. 6, pp. 1-6
- Kang, D.H., Kim, K.H., 1998, 'Improvment of the Mathematical Model for Combustion Control in the Reheating Furnace of Plate-Mill,' RIST Report 98A309
- Kang, D.H., Kim, K.H. and Lee Y.K., 2001, 'The Study on the Gas Temperature Set by Calculating the Sensitivity of Slab Temperature in Reheating Furnace,' Trans. of the KSME, Part B, Vol.25, No.8, pp. 1030-1036
- Ozisik, M. N., 1993, Heat Conduction, John Wiley & Sons, Inc.
- M. J. Colaco and H. R. B. Orlande, 2001, 'Inverse Forced Convection Problem of Simultaneous Estimation of Two boundary Heat Fluxes in Irregularly Shaped Channels,' Num. Heat Transfer, Part A, Vol. 39, pp. 737-760 https://doi.org/10.1080/10407780117384
- Alifanov, O. M., 1994, Inverse Heat Transfer Problems, Springer-Verlag
- Kim, W. S., Ozisik, M. N., and Choi, E. R., 1999, 'Alternate Application of Regular and Modified Conjugate Gradient Method,' Hybrid Methods in Engineering, Vol. 1, No. 3, pp. 217-234