Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Deformation Characteristics of Gear System with a Profile Shift Coefficient Preserving Center Distance

중심 거리 불변의 전위 계수를 적용한 기어 시스템의 변형 특성 해석

  • 박수진 (부산대학교 대학원 기계설계공학과) ;
  • 유완석 (부산대학교 기계공학부)
  • Published : 2003.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, elastic deformations of several gear teeth are analyzed. The contact between a gear and pinion is modeled as a contact problem. The deformation overlap, which is defined as the interference due to deformation of gear teeth, is defined to represent the deformation characteristics of profile shifted spur sear system. The calculated deformation overlap shows teeth interference in the deformed state of a Rear system.

Keywords

References

  1. Yau, E., Busby, H. R. and Houser, D. R., 1994, 'A Rayleigh-Ritz Approach to Modeling Bending and Shear Deformation of Gear Teeth,' Computer & Structures, Vol. 50, No.5, pp. 705-713 https://doi.org/10.1016/0045-7949(94)90429-4
  2. Park, C. I.. and Lee, J. M., 1996, 'A Study on the Vibration Characteristics of Helical Gears with Tooth Errors,' Transactions of the KSME, A, Vol. 20, No.5, pp. 1534-1542
  3. Umezawa, K, 1972, 'Deflections and Moments Due to a Concentrated Load on a Rack-Shaped Cantilever Plate with Finite Width for Gears,' Bulletin of the JSME, Vol. 15, No. 79, pp. 116-130 https://doi.org/10.1299/jsme1958.15.116
  4. Umezawa, K. and Ishikawa, J, 1973, 'Deflection Due to Contact between Gear Teeth with Finite Width,' Bulletin of the JSME, Vol. 16, No. 97, pp. 1085-1093 https://doi.org/10.1299/jsme1958.16.1085
  5. Wallace, D. B. and Seireg, A, 1973, 'Computer Simulation of Dynamic Stress, Deformation, and Fracture of Gear Teeth,' Transactions of the ASME, Journal of Engineering for Industry, Vol. 95, No.4, pp. 1108-1114 https://doi.org/10.1115/1.3438258
  6. Chabert, G, Dang Tran, T, Mathis, R, 1974, 'An Evaluation of Stresses and Deflection of Spur Gear Teeth under Strain,' Transactions of the ASME, Journal of Engineering, Vol. 96, No. 1, pp. 85-93 https://doi.org/10.1115/1.3438335
  7. Cardou, A. and Tordion, G. V, 1985, 'Calculation of Spur Gear Tooth Flexibility by the Complex Potential Method,' Transactions of the ASME, Journal of Mechanics, Transmissions, and Automation in Design, Vol. 107, pp. 38-42 https://doi.org/10.1115/1.3258691
  8. Fukunaga, K, 1987, 'A Strength Analysis of Spur Gears including Ratio of Contact,' Japan Society of Mechanical Engineers, Transactions Series C, Vol. 53, No. 489, pp. 1071-1076 https://doi.org/10.1299/kikaic.53.1071
  9. Stegemiller, M. E, 1993, 'A Three-dimensional Analysis of the Base Flexibility of Gear Teeth,' Transactions of the ASME, Journal of Mechanical Design, Vol. 115, pp. 186-192 https://doi.org/10.1115/1.2919317
  10. Gagnon, P, Gosselin, C. and Cloutier, L, 1997, 'Analysis of Spur and Straight Bevel Gear Teeth Deflection by the Finite Strip Method,' Transactions of the ASME, Journal of Mechanical Design, Vol. 119, pp. 421-426 https://doi.org/10.1115/1.2826385
  11. Huh, G. J, 1991, 'Constrained Variational Approach for Dynamic Analysis of Elastic Contact Problems,' Finite Element in Analysis and Design, Vol. 10, pp. 125-136 https://doi.org/10.1016/0168-874X(91)90037-Y
  12. Van de Panne, Whinstone, A, 1964, 'The Simplex and the Dual Method for Quadratic Programming,' Operational Research Quarterly, Vol. 15, No.4, pp. 355-388 https://doi.org/10.2307/3007121
  13. Huh, G. J. and Park, S. J., 1999, 'A Study on the Profile Modification of Spur Gears for the Prevention of Gear Tooth Overlap by Deformation,' Journal of the Korean Society of Precision Engineering, Vol. 16, No.3, pp. 208-214
  14. Colbourne, J. R, 1987, The Geometry of Involute Gears, Springer-Verlag, New-York, pp. 212-218
  15. Bathe, K. J, 1996, Finite Element Procedures, Prentice-Hall International Editions, pp. 342-363, 622-628